Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–50
M9220 Series Electric Spring-Return Actuators (Continued)
Electric Damper Actuators
Accessories
Code Number Description
DMPR-KC003
1
1. Furnished with the damper and may be ordered separately
7 in. (178 mm) Blade Pin Extension (without Bracket) for Johnson Controls Direct-Mount Damper Applications (Quantity 5)
M9000-153 Crankarm (Quantity 1)
M9000-158 Tandem Mounting Kit Used to Mount Two Models of M9220-xxx-3 Series Proportional Electric Spring-Return Actuators (Quantity 1)
M9000-170 Remote Mounting Kit, Horizontal. Kit Includes Mounting Bracket, M9000-153 Crankarm, Ball Joint, and Mounting Bolts (Quantity 1)
M9000-171 Remote Mounting Kit, Vertical. Kit Includes Mounting Bracket, M9000-153 Crankarm, Ball Joint, and Mounting Bolts (Quantity 1)
M9000-200 Commissioning Tool that Provides a Control Signal to Drive 24 V On/Off, Floating, Proportional, and/or Resistive Electric Actuators
(Quantity 1)
M9000-320 Weather Shield Enclosure - NEMA 3R Enclosure for Protecting a Single M9210/20 Actuator from Rain, Sleet, or Snow (Quantity 1)
M9000-400 Jackshaft Linkage Kit. Open-Ended Design Enables Clamping onto a Jackshaft without Requiring Access to the Ends of the Jackshaft
(Quantity 1)
M9000-604 Replacement Anti-Rotation Bracket Kit (with Screws) for M9220-xxx-3 Series Proportional Electric Spring-Return Actuators (Quantity 1)
M9200-100 Threaded Conduit Adapter, 1/2 NPSM, for M9210(20) and M(VA)9208 Series Actuators (Quantity 5)
M9220-600 1 in. (25 mm) Jackshaft Coupler Kit (with Locking Clip) for Mounting M9220-xxx-3 Proportional Electric Spring-Return Actuators on
Dampers with 3/4 to 1-1/16 in. or 19 to 27 mm Round Shafts, or 5/8 and 3/4 in. or 16, 18, and 19 mm Square Shafts (Quantity 1)
M9220-601 Replacement Coupler Kit (with Locking Clip) for Mounting M9220-xxx-3 Proportional Electric Spring-Return Actuators on Dampers with
1/2 to 3/4 in. or 12 to 19 mm Round Shafts, or 3/8 and 1/2 in. or 10, 12, and 14 mm Square Shafts (Quantity 1)
M9220-602 Replacement Locking Clips for M9220-xxx-3 Proportional Electric Spring-Return Actuators (Five per Bag)
M9220-603 Adjustable Stop Kit for M9220-xxx-3 Proportional Electric Spring-Return Actuators (Quantity 1)
M9220-604 Replacement Manual Override Cranks for M9220-xxx-3 Proportional Electric Spring-Return Actuators (Five per Bag)
M9220-610 Replacement Shaft Gripper, 10 mm Square Shaft with Locking Clip (Quantity 1)
M9220-612 Replacement Shaft Gripper, 12 mm Square Shaft with Locking Clip (Quantity 1)
M9220-614 Replacement Shaft Gripper, 14 mm Square Shaft with Locking Clip (Quantity 1)
Electric Damper Actuators
Electric Damper Actuators
Electric Damper ActuatorsElectric Damper Actuators