Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–35
M9108, M9116, M9124, and M9132 Series Electric Non-Spring-Return Actuators
(Continued)
Electric Damper Actuators
Accessories
Code Number Description
DMPR-KC003
1
1. Furnished with the damper and may be ordered separately
Square head blade pin extension without bracket for Johnson Controls® CD-1300 direct-mount applications
DMPR-KC011 Hex head blade pin extension without bracket
DMPR-KC012 Hex head blade pin extension with bracket
DMPR-KC210 Damper jackshaft 1 in. diameter, 1 panel
DMPR-KC211 Damper jackshaft 1 in. diameter, 2 panel
DMPR-KC212 Damper jackshaft 1 in. diameter, 3 panel
DMPR-KC213 Damper jackshaft 1/2 in. diameter, 1 panel
DMPR-KC214 Damper jackshaft 1/2 in. diameter, 2 panel
M9000-103 14 VA transformer, 120/24 VAC, 60 Hz, Class 2
M9000-104 14 VA transformer, 230/24 VAC, 60 Hz, Class 2
M9000-105 Pluggable 3-terminal block
M9000-151 Base mount linkage kit for remote inside duct mounting (not intended for M9132 actuators or any tandem application)
M9000-153 Crankarm kit for remote mounting (not intended for M9132 actuators or any tandem application)
M9000-154 1 in. jackshaft coupler for mounting on a 1 in. diameter damper shaft
M9000-155 Manual handle for positioning a damper or valve when power is removed from an M91xx actuator
M9000-158 Mounting kit to tandem mount two M9116-GGx or -HGx models; two M9124-AGx, -GGx, or -HGx; or two M9132-AGx or -GGx models on a
damper
M9000-160 Replacement anti-rotation bracket for M91xx Series actuators
M9000-200 Commissioning tool provides a control signal to drive on/off, floating, proportional, or resistive actuators
M9000-516 Valve linkage kit for mounting M9108 actuators to 1/2 in. to 2 in. two-way and three-way VG1000 Series ball valves
M9000-518 Valve linkage kit for mounting M9124 actuators to 2-1/2 in. to 4 in. VG1xA5 Series flange body ball valves to VG1x43 1-1/2 in. valves
Electric Damper ActuatorsElectric Damper ActuatorsElectric Damper ActuatorsElectric Damper Actuators