Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–32
M9109-xGx-2 Series Electric Non-Spring-Return Actuators (Continued)
Electric Damper Actuators
Technical Specifications
M9109-xGx-2 Series Electric Non-Spring-Return Actuators
Power Requirement AGx: AC 20 to 30 V at 50/60 Hz, 2.5 VA supply, Class 2
GGx: AC 20 to 30 V at 50/60 Hz, 3.2 VA supply, Class 2
Control Type AGx: floating
GGx: DC 0(2) to 10 V or DC 0(4) to 20 mA proportional
Input Signal AGx: AC 20 to 30 V at 50/60 Hz
GGx: DC 0(2) to 10 V or DC 0(4) to 20 mA
Input Signal Adjustments: AGx: CW and COM terminals, CW rotation; CCW and COM terminals, CCW rotation
GGx (voltage input or current input):
Jumper selectable: DC 0(2) to 10 V or DC 0(4) to 20 mA
Factory setting: DC 0 to 10 V, CW rotation with signal increase
Action is jumper selectable direct (CW) or reverse (CCW) with signal increase.
Input Impedance AGx: 200 ohms, nominal
GGx: voltage input, 150,000 ohms; current input, 500 ohms
Feedback Signal AGF: 10,000 ohm potentiometer, 1 W
GGx: DC 0 to 10 V or DC 2 to 10 V for 90° (10 VDC at 1 mA);
Corresponds to input signal span selection
Auxiliary Switch Rating xGC: two single-pole, double-throw (SPDT) switches rated at AC 24 V, 1.5 A inductive, 3.0 A resistive, 35 VA
maximum per switch, Class 2
Torque Rating 80 lb·in (9 N·m)
Cycle Life 100,000 full cycles; 2,500,000 repositions rated at 80 lb·in (9 N·m)
Audible Noise Rating 35 dBA maximum at 39.4 in. (1 m)
Rotation Range Adjustable from 30 to 90°, CW or CCW
Rotation Time 60 seconds at 60 Hz and 72 seconds at 50 Hz for 90°
Electrical Connection 1/4 in. spade terminals (to order optional pluggable terminal blocks, see Accessories
)
Mechanical Connection 3/8 to 1/2 in. (10 to 12.7 mm) round shaft or 3/8 in. (10 mm) square shaft
Enclosure Rating NEMA 2, IP32
Ambient Operating Rating -4 to 125°F (-20 to 52°C); 90% RH maximum, noncondensing
Ambient Storage Rating -40 to 176°F (-40 to 80°C); 90% RH maximum, noncondensing
Shipping Weight 2.4 lb (1.08 kg)
Compliance United States UL 873 Listed, File E27734, CCN XAPX
Canada CSA C22.2 No. 139 Certified, File LR85083, Class 3221 02
Europe CE Mark - Johnson Controls, Inc. declares that this product is in compliance with the essential requirements and
other relevant provisions of the EMC Directive 2004/108/EC.
Electric Damper Actuators
Electric Damper Actuators
Electric Damper ActuatorsElectric Damper Actuators