Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–316
V-4000-1 Small Pneumatic Actuator for Small Control Valves
Description
The V-4000-1 Small Pneumatic Actuator
accurately positions the modulating plugs of
chilled- or hot-water control valves in response
to a pneumatic signal from a controller.
Refer to the V-4000 Small Pneumatic Actuator
for Small Control Brass Valves Product
Bulletin (LIT-977255) for important product
application information.
Applications
Direct replacement for all oval top
(V-3800 Series) actuators (except
V-3801-8001 on VG7000 Series valves).
Features
directly replaces field installed V-3854 and
V-3800 models
tailored for small terminal unit valve
applications
direct replacement for oval top actuators
(VT Series and older oval top series)
Repair Information
If the V-4000-1 Pneumatic Actuator fails to
operate within its specifications, replace the
unit. For a replacement actuator, contact the
nearest Johnson Controls® representative.
Selection Chart
Code Number Description
V-4000-1 Small Pneumatic Actuator
Code No. LIT-1924070
Technical Specifications
V-4000-1 Small Pneumatic Actuator for Small Control Valves
Ambient Temperature Limits -20 to 150°F (-29 to 66°C)
Relative Humidity 5 to 90% RH
Fluid Operating Temperature Limits 35 to 200°F (2 to 93°C)
Storage Condition Limits -20 to 150°F (-23 to 66°C) 5 to 95% RH
Dimensions (H x Diameter) 3.27 x 2.84 in. (83.1 x 72.1 mm)
Maximum Control Pressure 30 psig (210 kPa)
Control Signal Air Connection Dual Barbed Fitting for 5/32 or 1/4 in. O.D. Tubing
Effective Diaphragm Area 4 sq. in. (2,581 sq. mm)
Materials Yoke and Cover Glass-Reinforced Nylon
Piston Glass-Reinforced Nylon
Diaphragm Fabric-Reinforced Synthetic Rubber
Retaining Nut Chromate-Coated Zinc
Available Spring Ranges 3 to 6, 4 to 8, and 9 to 13 psi
1
1. A spring is assembled with the valve body, not in the actuator. For spring kits to field mount V-3802-1 to
valve bodies, refer to the Valve Spring Kits Sorted by Valve Code Number Catalog Page (LIT-1924395),
online or in the Johnson Controls Valves and Actuators Catalog.
V-4000-1 Actuators
Other Valves and Actuators
Threaded Globe Valves and
Actuators
Other Valves and Actuators