Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–315
V-3000 Series Pneumatic Actuator
Description
The V-3000 Series Pneumatic Actuator can
position steam or water valve-modulating
plugs in response to a pneumatic signal from a
controller.
Refer to the V-3000 Pneumatic Valve Actuator
Exposed or Enclosed Product Bulletin
(LIT-977250) for important product application
information.
Features
molded synthetic rubber diaphragm design
provides a constant effective area
throughout the valve stem stroke
die-cast aluminum housing coated with
corrosion-resistant finish
remove or reposition actuator by loosening
a single set screw
easily field mounted to the valve bonnet
with a single set screw
can be mounted to any of the V-3000,
V-4000, or VT Series Valves
(except V-3854)
Applications
Used on 1/2 in. Flare Valves, VT Series
Valves, and 3/4 to 1-1/2 Cage Trim Valves.
This actuator is not used with VG7000 Series
Valves.
Repair Information
If the V-3000 Series Pneumatic Actuator fails
to operate within its specifications, replace the
unit. For a replacement actuator, contact the
nearest Johnson Controls® representative.
Code No. LIT-1924055
Selection Chart
Accessories
Code Number Description
V-3000-1 Exposed Yoke
Code Number Description
V-3000-10 Valve Position Indicator
V-9502-15 Positioner Kit
1
1. Refer to the V-9502 Series Pneumatic Valve Actuator Positioners Product
Bulletin (LIT-977265).
Exposed V-3000-1 Actuator
Technical Specifications
V-3000 Series Pneumatic Actuator
Media Temperature 281°F Maximum
Maximum Control
Pressure
30 psig
Available Spring
1
Ranges
1. A spring is assembled with the valve body, not in the actuator.
For spring kits to field mount V-3000-1 to valve bodies, refer to the Valve Spring
Kits Sorted by Valve Code Number Catalog Page (LIT-1924395) online or in the
Johnson Controls Valves and Actuators Catalog.
3 to 6, 4 to 8, and 9 to 13 psig
Air Connection 1/8 in. NPT Barbed Fitting for 5/32 in. O.D. Polytubing
Size, in. 3 H x 4-7/16 Diameter
Other Valves and Actuators
Threaded Globe Valves and
Actuators
Other Valves and Actuators
Threaded Globe Valves and
Actuators
Other Valves and Actuators