Brochure

The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–300
V-9000 Series Rotary Motion Rack and Pinion Pneumatic Actuators for Butterfly Valves
(Continued)
Butterfly Valves and Actuators
Technical Specifications
Travel Switches
Code Number and Specifications Description
Travel Limit
Switch Models
V-9000-400
1
For All V-9000 Series Actuators
Mounting Kits
V-9000-401
1
For V-9x92 and V-9x93 Series Actuators
V-9000-402
1
For V-9x94 and V-9x95 Series Actuators
V-9000-403
1
For V-9x96 and V-9x97 Series Actuators
V-9000-404
2
For V-9x96, V-9x97, and V-9x98 Series Actuators
3
Features Switches Two Single-Pole, Double-Throw (SPDT)
Electrical Rating 5 A at 120/250 VAC; 5 A at 24 VDC
Body Materials Die-Cast Aluminum, NEMA 4, 4x Housing
1. For actuators manufactured before April 1, 1992
2. For actuators manufactured after April 1, 1992
3. Mounting kits are not required for smaller size actuators (V-9x92 through V-9x95).
Pneumatic Rack and Pinion Actuator Adapter Sleeves
1
Valve Size, in. V-9x92-xx V-9x93-xx V-9x94-1x V-9x94-2x V-9x95-xx V-9x96-xx V-9x97-xx V-9x98-xx
2 Not Required V-9094-300 V-9094-300 V-9095-300 V-9095-300
2-1/2 Not Required V-9094-300 V-9094-300 V-9095-300 V-9095-300
3 Not Required V-9094-300 V-9094-300 V-9095-300 V-9095-300
4 V-9094-400 V-9094-400 V-9095-400 V-9095-400
5 Not Required Not Required V-9095-600 V-9095-600 V-9096-600
6 Not Required Not Required V-9095-600 V-9095-600 V-9096-600
8 V-9095-800 V-9095-800 V-9096-800 V-9097-800
10 Not Required Not Required Not Required V-9097-120
12 Not Required Not Required Not Required V-9097-120
14 V-9097-160 V-9098-100
16 V-9097-160 V-9098-100
18 Not Required V-9098-200
20 Not Required V-9098-200
1. Adapter sleeves are required to field mount rack and pinion actuators to VFM valves.
V-9000 Series Rotary Motion Rack and Pinion Pneumatic Actuators for Butterfly Valves
Models V-909x Series Rack and Pinion Double Acting Actuators; See V-909x Series Actuator Torque Data
(lb·in) and Ordering Data (Double Acting) Table for Full Code Numbers.
V-919x Series Rack and Pinion Spring-Return Actuators; See V-919x Series Actuator Torque Data
(lb·in) and Ordering Data (Spring Return) Table for Full Code Numbers.
Output Torque V-909x Series See V-909x Series Actuator Torque Data (lb·in) and Ordering Data (Double Acting)
.
V-919x Series See V-919x Series Actuator Torque Data (lb·in) and Ordering Data (Spring Return)
.
Supply Pressure Nominal 60 to 80 psig (420 to 560 kPa);
Minimum 40 psi (280 kPa), Maximum 140 psi (980 kPa).
Air Supply Must be Clean (Filtered), Dry, and Oil Free.
Ambient Temperature Limits -13 to 200°F (-25 to 93°C)
Materials Body Extruded Aluminum, Anodized
End Caps Die Cast Aluminum, Polyester Coated
Pistons Die Cast Aluminum
Output Shaft Carbon Steel, Zinc Plated
Piston Guides Acetal
Spring Cartridges Coated Spring Steel, Zinc Plated Hardware
O-Ring Seals Buna-N Rubber
Pneumatic Damper
Actuators
Buttery Valves and
Actuators