Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–299
V-9000 Series Rotary Motion Rack and Pinion Pneumatic Actuators for Butterfly Valves
(Continued)
Butterfly Valves and Actuators
Accessories
Solenoid Valves Including Mounting Hardware
Code Number and Features Description
V-9000-146
1
1. For actuators manufactured after April 1, 1992
120 VAC Solenoid Air Valve, Four-Way, for New Style
V-9092 to V-9094-1 and V-9193 to V-9194-1 Series Actuators
V-9000-147
1
120 VAC Solenoid Air Valve, Four-Way, for New Style
V-9094-2 to V-9098 and V-9194-2 to V-9198 Series Actuators
Features Voltage Requirements 120 VAC
Power Consumption AC: 5.6 VA; DC: 7.2 W
Maximum Pressure 140 psig (980 kPa)
Ambient Temperature Limits 0 to 180°F (-18 to 82°C)
Air Connections 1/4 in. NPT (Internal)
Electrical Connections 18 AWG Leads, 24 in. (61 cm) Long
Enclosure Materials Die-Cast Aluminum Body with NEMA 4 Coil Housing
Speed Controls
Code Number Description
V-9000-311 Brass Speed Controls (Two) for New Style
1
V-9192 to V-9194-2 Series Actuators
1. For actuators manufactured after April 1, 1992
V-9000-312 Brass Speed Controls (Two) for New Style
1
V-9194-2 to V-9198 Series Actuators
Plastic Position Indicators
Actuator Series
Code Number
1
1. For actuators manufactured after April 1, 1992
V-9x92 V-9092-611
V-9x93 V-9093-611
V-9x94-1x V-9094-6111
V-9x94-2x V-9094-6112
V-9x95 V-9095-611
V-9x96 V-9096-611
V-9x97 V-9097-611
V-9x98 V-9098-611
Positioners
Code Number and Specifications Description
Models V-9000-500 Pneumatic Positioner for All Old and New Style
V-9000 Series Actuators (Includes Three Gauges)
Mounting Kits
V-9000-502
1
1. For actuators manufactured before April 1, 1992
Positioner Mounting Kit for Old-Style V-9x94 and V-9x95 Series Actuators
V-9000-511
2
2. For actuators manufactured after April 1, 1992
Positioner Mounting Kit for New Style V-9x92 to V-9x94-1 Series Actuators
V-9000-512
2
Positioner Mounting Kit for New Style V-9x94-2 and V-9x95 Series Actuators
V-9000-513
2
Positioner Mounting Kit for New Style V-9x96 to V-9x98 Series Actuators
Air
Specifications
Supply Pressure 40 to 140 psig (280 to 980 kPa)
Air Supply Must be Clean (Filtered), Dry, and Oil Free.
Output Flow Capacity 2,000 scim (546 mL/s) at 60 psig (420 kPa)
Air Consumption 1,200 scim (328 mL/s) at 60 psig (420 kPa)
Control Action Direct or Reverse; Field Selectable
Operating Range Factory Set at 3 to 15 psig (21 to 105 kPa) for 90° Rotation;
Field Selectable at 3 to 15 psig for 65° Rotation or 3 to 9 psig
(21 to 63 kPa) or 9 to 15 psig (63 to 105 kPa) for 65° Rotation
Starting Point Factory Set at Approximately 3 psig (21 kPa)
Ambient Temperature Limits -5 to 160°F (-21 to 71°C)
Air
Connections
Supply 1/4 in. NPT (Internal)
Control Input 1/8 in. NPT (Internal)
Outputs 1/8 in. NPT (Internal)
Materials Body Aluminum, Anodized
Diaphragm Buna-N Rubber
Spool Stainless Steel
Cover Polycarbonate
Pneumatic Damper
Actuators
Buttery Valves and
Actuators
Pneumatic Damper
Actuators
Buttery Valves and
Actuators