Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–28
M9106-AGx-2N0x Series Electric Non-Spring-Return Actuators (Continued)
Electric Damper Actuators
Accessories
Code Number Description
CBL-2000-1 20 in. (0.5 m) wiring harness, UL accepted for plenum use, supplied with the M9106-AGS-2N02 and may be ordered separately; connects the
M9106 and DPT-2015 to the VAV controller
CBL-2000-2 20 in. (0.5 m) plenum rated wiring harness; Underwriters Laboratories, Inc.® (UL) accepted for plenum use; connects the M9101 and
DPT-2015-0 to the VAV controller
CBL-2000-3 72 in. (1.8 m) plenum rated wiring harness
DPT-2015-0 0 to 1.5 in. W.C. (0 to 374 Pa) differential pressure transmitter
DMPR-KC003 Blade pin extension without bracket supplied with Johnson Controls CD-1300 dampers and may be ordered separately for all direct-mount
applications
DMPR-KC011 Hex head blade pin extension without bracket
DMPR-KC012 Hex head blade pin extension with bracket
M9000-200 Commissioning tool provides a control signal to drive on/off, floating, proportional, or resistive actuators
Dimensions, in. (mm)
Electric Damper Actuators
Electric Damper Actuators
Electric Damper ActuatorsElectric Damper Actuators