Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–291
Two-Way, Manually Operated, High-Pressure, High-Temperature Butterfly Valve
Assemblies
Description
VF Series Two-Way, Manually Operated,
High-Pressure, High-Temperature Butterfly
Valve Assemblies are specifically designed
for a wide range of HVAC applications,
including two-position and
modulating/throttling control of hot water,
chilled water, condenser water, and steam.
Refer to the VF Series High-Pressure,
High-Temperature Butterfly Valves for Steam
Service Application Note (LIT 977321) for
more information on steam applications.
These lug-style valves offer bidirectional
shutoff at full-rated American National
Standards Institute (ANSI) Class 150 and 300
operating pressures, increasing the range of
applications—particularly in high-rise building
HVAC control applications. ANSI Class 150
and 300 models are also suitable for steam
applications.
Refer to the VF Series High-Pressure,
High-Temperature Butterfly Valves Product
Bulletin (LIT-977208) for important product
application information.
Features
compatible with all types of ANSI 150/300
slip-on and weld-neck flanges
high-pressure, high-temperature design
bidirectional shutoff, dead-end service
live-loaded seat design with fully encased
O-ring
double offset stem design
broad range of compact pre-assembled
actuators available
direct actuator-to-stem mounting
Repair Information
If the VF Series Butterfly Valve Assembly fails
to operate within its specifications, refer to the
VF Series High-Pressure, High-Temperature
Butterfly Valves Product Bulletin (LIT-977208)
for a list of repair parts available.
Two-Way, Manually Operated,
High-Pressure, High-Temperature
Butterfly Valve Assemblies
Code No. LIT-1900152
Selection Chart
Valve Code
Number
Actuator Ten-Position Manual
Handle
Gear-Operated Manual Hand
Wheel
Size, in. Cv at 90° Closeoff
Pressure, psig
Two-Way, Manually Operated — ANSI Class 300 Flanges
1
1. Maximum closeoff pressure for ANSI Class 300 valves is 740 psig (5,102.1 kPa) for fluid temperatures below 100°F (37.8°C), and 550 psig (3,790 kPa) for fluid
temperatures at 250°F (121.1°C). Maximum steam pressure is 150 psig (1,034.2 kPa) for on/off service, and 50 psig (344.8 kPa) for proportional service.
VFM-025ZE 2-1/2 160 550 VFM-025ZE-000M VFM-025ZE-000G
VFM-030ZE 3 185 VFM-030ZE-000M VFM-030ZE-000G
VFM-040ZE 4 375 VFM-040ZE-000M VFM-040ZE-000G
VFM-050ZE 5 790 VFM-050ZE-000M VFM-050ZE-000G
VFM-060ZE 6 1,000 VFM-060ZE-000M VFM-060ZE-000G
VFM-080ZE 82,000 VFM-080ZE-000G
VFM-100ZE 10 2,650 VFM-100ZE-000G
VFM-120ZE 12 4,000 VFM-120ZE-000G
VFM-140ZE 14 4,100 VFM-140ZE-000G
Two-Way, Manually Operated — ANSI Class 150 Flanges
2
2. Maximum closeoff pressure for ANSI Class 150 valves is 285 psig (1,965 kPa) for fluid temperatures below 100°F (37.8°C), and 240 psig (1,654.8 kPa) for fluid
temperatures at 250°F (121.1°C). Maximum steam pressure is 150 psig (1,034.2 kPa) for on/off service, and 50 psig (344.8 kPa) for proportional service.
VFM-025VE 2-1/2 160 240 VFM-025VE-000M VFM-025VE-000G
VFM-030VE 3 185 VFM-030VE-000M VFM-030VE-000G
VFM-040VE 4 375 VFM-040VE-000M VFM-040VE-000G
VFM-050VE 5 790 VFM-050VE-000M VFM-050VE-000G
VFM-060VE 6 1,350 VFM-060VE-000M VFM-060VE-000G
VFM-080VE 82,800 VFM-080VE-000G
VFM-100VE 10 4,300 VFM-100VE-000G
VFM-120VE 12 6,650 VFM-120VE-000G
VFM-140VE 14 7,650 VFM-140VE-000G
Butterfly Valves and Actuators
Pneumatic Damper
Actuators
Buttery Valves and
Actuators
Pneumatic Damper
Actuators
Buttery Valves and
Actuators