Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–288
Two-Way, Industrial-Grade, Non-Spring-Return, V-909x Series High-Pressure
Pneumatically Actuated, High-Pressure, High-Temperature Butterfly Valve Assemblies
(Continued)
Butterfly Valves and Actuators
Technical Specifications
Two-Way, Industrial-Grade, Non-Spring-Return, V-909x Series High-Pressure Pneumatically Actuated,
High-Pressure, High-Temperature Butterfly Valve Assemblies
1
1. Refer to the VF Series High-Pressure, High-Temperature Butterfly Valves Product Bulletin (LIT-977208) for actuator specifications.
Service Hot, Chilled, or Condenser Water, and Steam
2
2. Types V and Z valves are rated for 150 psig (1,034 kPa) saturated steam at 366°F (186°C) for two-position applications, and 50 psig (345 kPa) saturated steam
at 297°F (147°C) for modulating applications. Refer to the VF Series High-Pressure, High-Temperature Butterfly Valves for Steam Service Application Note
(LIT-977321) for more information.
Body Styles and Sizes Two-Way, 2-1/2 through 16 in., Fully Lugged
3
3. For 18 in. or larger ANSI Class 150 valves and 16 in. or larger ANSI Class 300 valves, consult the local Johnson Controls® office.
Fluid Temperature Limits -20 to 500°F (-29 to 260°C)
Maximum Closeoff Pressure 2-1/2 through 16 in.
ANSI Class 150 Valves
(Type V)
240 psig (1,654 kPa) at 250°F (121°C)
Fluid Temperature, Bidirectional
3
240 psig (1,654 kPa) at 250°F (121°C)
Fluid Temperature, Dead-End Service
3, 4
4. The preferred orientation of the seat retainer in dead-end service is against the flange.
2-1/2 through 14 in.
ANSI Class 300
Valves (Type Z)
550 psig (3,790 kPa) at 250°F (121°C)
Fluid Temperature, Bidirectional
3,
5
550 psig (3,790 kPa) at 250°F (121°C)
Fluid Temperature, Dead-End Service
3, 4, 5
5. For pressures between 550 and 740 psig (3,790 and 5,099 kPa), consult the local Johnson Controls office.
Materials Body Carbon Steel, ASTM A216 GR WCB/A516 GR 70
Disk Stainless Steel, ASTM A 351 GR CF8M
Seat Assembly RTFE with Silicone Rubber O-Ring
Seat Retainer Carbon Steel, ASTM A516 GR 70
Stem 17-4 PH Stainless Steel, ASTM A564-Type 630
Ambient Storage Temperature Limits -20 to 150°F (-29 to 66°C);
Preferably 40 to 85°F (4 to 29°C)
Pneumatic Damper
Actuators
Buttery Valves and
Actuators