Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–26
M9106-xGx-2 Series Electric Non-Spring-Return Actuators (Continued)
Electric Damper Actuators
Technical Specifications
M9106-xGx-2 Series Electric Non-Spring-Return Actuators
Power Requirement AGx: AC 20-30 V at 50/60 Hz, 2.5 VA supply, Class 2
IGx: AC 20-30 V at 50/60 Hz, 2.8 VA supply, Class 2
GGx: AC 20-30 V at 50/60 Hz, 3.2 VA supply, Class 2
Control Type AGx: floating
IGx: on/off, floating
GGx: DC 0(2) to 10 V or DC 0(4) to 20 mA proportional
Input Signal AGx and IGx: AC 20 to 30 V at 50/60 Hz
GGx: DC 0 to 10 V or DC 0(4) to 20 mA
Input Signal Adjustments: AGx and IGx: CW and COM Terminals, CW rotation; CCW and COM terminals, CCW rotation
GGx (voltage input or current input):
Jumper selectable: DC 0(2) to 10 V or DC 0(4) to 20 mA
Factory setting: DC 0 to 10 V, CW rotation with signal increase
Action is jumper selectable direct (CW) or reverse (CCW) with signal increase.
Input Impedance AGx: 200 ohms, nominal
IGx: 160 ohms, nominal
GGx: voltage input, 150,000 ohms; current input, 500 ohms
Feedback Signal AGF: 10,000 ohm potentiometer, 1 W
GGx: DC 0 to 10 V or DC 2 to 10 V for 90° (1 mA);
Corresponds to input signal span selection
Auxiliary Switch Rating xGC: two single-pole, double-throw (SPDT) switches rated at AC 24 V, 1.5 A inductive, 3.0 A resistive, 35 VA
maximum per switch, Class 2
Torque Rating 1, 1.5, and 2 minute settings: 53 lb·in (6 N·m)
5.5 and 11 minute settings: 35 lb·in (4 N·m)
Cycle Life 100,000 full cycles; 2,500,000 repositions rated at 53 lb·in (6 N·m)
Audible Noise Rating 35 dBA maximum at 39.4 in. (1 m)
Rotation Range Adjustable from 30 to 90°, CW or CCW
Rotation Time IGx: adjustable with switch settings (factory set for 1 minute) 60, 90, 120, 330, or 660 seconds (1, 1.5, 2, 5.5 or
11 minutes) at 60 Hz and 72, 108, 144, 396, or 792 seconds at 50 Hz
All other models: nominal 60 seconds at 60 Hz and 72 seconds at 50 Hz for 90°
Electrical Connection 1/4 in. spade terminals (to order optional pluggable terminal blocks, see Accessories
)
Mechanical Connection 3/8 to 1/2 in. (10 to 12.7 mm) round shaft or 3/8 in. (10 mm) square shaft
Enclosure Rating NEMA 2, IP32
Ambient Operating Rating -4 to 125°F (-20 to 52°C); 90% RH maximum, noncondensing
Ambient Storage Rating IGx: -40 to 186°F (-40 to 86°C); 90% RH maximum, noncondensing
All other models: -40 to 176°F (-40 to 80°C); 90% RH maximum, noncondensing
Shipping Weight 2.4 lb (1.08 kg)
Compliance United States UL 873 Listed, File E27734, CCN XAPX
Canada CSA C22.2 No. 139 Certified, File LR85083, Class 3221 02
Europe CE Mark - Johnson Controls, Inc. declares that this product is in compliance with the essential requirements and other
relevant provisions of the EMC Directive 2004/108/EC.
Electric Damper Actuators
Electric Damper Actuators
Electric Damper ActuatorsElectric Damper Actuators