Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–25
M9106-xGx-2 Series Electric Non-Spring-Return Actuators (Continued)
Electric Damper Actuators
Accessories
Code Number Description
CBL-2000-1 20 in. (0.5 m) wiring harness, UL accepted for plenum use, connects the M9106 and DPT-2015 to the VAV controller
CBL-2000-2 20 in. (0.5 m) plenum rated wiring harness
CBL-2000-3 72 in. (1.8 m) plenum rated wiring harness
DPT-2015-0 0 to 1.5 in. W.C. (0 to 374 Pa) differential pressure transmitter
DMPR-KC003 Square head blade pin extension without bracket supplied with Johnson Controls CD-1300 dampers and may be ordered separately for all
direct-mount applications
DMPR-KC010 Adjustable blade position indicator switch kit with total switching load limited to 2,000 VA for the following applications:
Pilot duty: AC 24 V, 50 VA; AC 125/250/277 V, 125 VA
Motor load: AC 125/250/277 V, 1/3 hp
Resistive load: AC 125 V, 11 A; AC 250 V, 8 A; AC 277 V, 7 A (all maximum values)
DMPR-KC011 Hex head blade pin extension without bracket
DMPR-KC012 Hex head blade pin extension with bracket
DMPR-KC213 Damper jackshaft 1/2 in. diameter, 1 panel
DMPR-KC214 Damper jackshaft 1/2 in. diameter, 2 panel
M9000-105 Pluggable 3-terminal block
M9000-106 Pluggable 4-terminal block
M9000-160 Replacement anti-rotation bracket for M9106 Series actuators
M9000-200 Commissioning tool provides a control signal to drive on/off, floating, proportional, or resistive actuators
M9000-520 Valve linkage kit for field mounting an M9106 Series actuator to a 1/2 in. (DN15) to 1-1/2 in. (DN40) VG1000 Series ball valve
Electric Damper ActuatorsElectric Damper ActuatorsElectric Damper ActuatorsElectric Damper Actuators