Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–23
M9104-AGx-2N Electric Non-Spring-Return Actuators (Continued)
Electric Damper Actuators
Dimensions
Technical Specifications
M9104-AGx-2N Electric Non-Spring-Return Actuators
Power Requirements M9104-AGx-2N: 20 to 30 VAC at 50 or 60 Hz, 2.1 VA maximum, Class 2
DPT-2015: 15 VDC (14.5 to 17 VDC, unregulated); 15 mA maximum
Input Signal M9104-AGx-2N: 24 VAC (20 to 30 VAC) at 50 or 60 Hz
Motor Input Impedance M9104-AGx-2N: 250 ohms, nominal
DPT-2015-0 Pressure range: 0 to 1.5 in. W.C. (0 to 374 Pa)
Over pressure limit: 15 in. W.C. (3.74 kPa)
Output voltage: 0.5 to 4.5 VDC with 25,000 ohm minimum load impedance
Audible Noise Rating 30 dBA maximum at 1 m
Mechanical Output Running torque: 35 lb·in (4 N·m)
Rotation Range Adjustable from 30 to 90°, CW or CCW
Rotation Time Nominal 90 seconds at 60 Hz for 90°; nominal 108 seconds at 50 Hz for 90°
Cycles 100,000 full cycles, 2,500,000 repositions rated at 35 lb·in (4 N·m)
Electrical Connection No. 6-32 screw terminals on the M9104 actuator; 1/4 in. spade terminals on the DPT-2015
Pressure Connection 6 in. (152 mm) length of silicone tubing with barbed fittings for 1/4 in. (6.35 mm) O.D. tubing
Enclosure NEMA 1, IP30
Ambient Operating Conditions M9104-AGA-2N: 32 to 125°F (0 to 52°C); 90% RH maximum, noncondensing
M9104-AGS-2N: 32 to 125°F (0 to 52°C); 90% RH maximum, noncondensing
60 to 100°F (16 to 38°C); 90% RH maximum, noncondensing for DPT rated accuracy
(Refer to the DPT-2015 Differential Pressure Transmitter for VAV Box Applications Installation Instructions
[Part No. 24-7547-18].)
Ambient Storage Conditions -20 to 150°F (-29 to 66°C); 90% RH maximum, noncondensing
Dimensions (H x W x D) M9104-AGA-2N: 5.95 x 4.2 x 2.15 in. (151.2 x 107.3 x 54.6 mm)
M9104-AGS-2N: 5.95 x 4.2 x 2.32 in. (151.2 x 107.3 x 58.9 mm) with the DPT-2015
Shipping Weight M9104-AGA-2N: 2.0 lb (0.91 kg)
M9104-AGS-2N: 2.2 lb (0.99 kg) with the DPT-2015
Compliance United States UL 873 Listed, File E27734, CCN XAPX
Canada CSA Certified C22.2 No. 139, File LR85083, Class 3221 02
Europe CE Mark - Johnson Controls, Inc. declares that this product is in compliance with the essential requirements and
other relevant provisions of the EMC Directive 2004/108/EC.
Dimensions, in. (mm)
91042Ndm.eps
Electric Damper ActuatorsElectric Damper ActuatorsElectric Damper ActuatorsElectric Damper Actuators