Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–231
VG1000 Series Flanged Ball Valves for Assembly in the Field
Code No. LIT-1900417
Description
VG1000 Series Flanged Ball Valves are
designed primarily to regulate the flow of hot
water, chilled water, and 50% glycol solutions
in response to the demand of a controller in
HVAC systems. The valves come in sizes of
2-1/2, 3, and 4 in. (DN65, DN80, and DN100).
These American Society of Mechanical
Engineers (ASME) Class 150 flanged valves
come in both two- and three-way
configurations. Johnson Controls offers valve,
linkage, and actuator assemblies for factory or
field mounting with either spring-return or
non-spring-return actuators.
Refer to the VG1000 Series Flanged Ball
Valve Product Bulletin (LIT-12011228) for
important product application information.
Features
Closeoff Pressure Rating: 100 psi for
Two-Way Valves; 50 psi for Three-Way
Valves — provides tight shutoff.
300 Stainless Steel Ball and Stem
Assembly — applies to systems with
high-temperature water (0 to 284°F
[-18 to 140°C]) or 25 psi saturated steam.
500:1 Rangeability — provides accurate
control under all load conditions.
M9000-330 and M9000-340 Weather
Shields Available for Field Installation —
protect the actuator from corrosion, rain,
freezing rain, sleet, and snow.
Repair Information
If the VG1000 Series Ball Valve fails to
operate within its specifications, replace the
valve body, actuator, or entire assembly. For
replacement parts, contact the nearest
Johnson Controls® representative.
Selection Charts
Flanged Ball Valves (for Assembly in the Field)
Part Number Size, in. (DN) Closeoff psig Control Disk Control Port A Control Port B
Two-Way Three-Way Two-Way Three-Way Cv (Kv) Cv (Kv)
VG12A5GS VG18A5GS 2-1/2 (DN65) 100 50 Yes 47 (40) 29 (25)
VG12A5GT VG18A5GT 74 (63) 47 (40)
VG12A5GU VG18A5GU 117 (100) 74 (63)
VG12A5HT VG18A5HT 3 (DN80) 100 50 Yes 74 (63) 47 (40)
VG12A5HU VG18A5HU 117 (100) 74 (63)
VG12A5HV VG18A5HV 176 (150) 88 (75)
VG12A5HW VG18A5HW No 211 (180) 105 (90)
VG12A5JU VG18A5JU 4 (DN100) 100 50 Yes 117 (100) 74 (63)
VG12A5JV VG18A5JV No 176 (150) 88 (75)
Actuators and Linkages (for Assembly in the Field)
Control Type Spring Return Switches Actuator Linkage Optional Weather Shield
AC 24 V On/Off (Floating Control) No No M9124-AGA-2 M9000-518 M9000-330
AC 24 V On/Off (Floating Control) Two M9124-AGC-2
DC 0 (2) to 10 V Proportional Control No M9124-GGA-2
DC 0 (2) to 10 V Proportional Control Two M9124-GGC-2
AC 24 V Three-Wire Floating Control Yes No M9220-AGA-3 M9000-519 M9000-340
AC 24 V Three-Wire Floating Control Two M9220-AGC-3
AC 120 V On/Off Control No M9220-BAA-3
AC 120 V On/Off Control Two M9220-BAC-3
AC 24 V On/Off Control No M9220-BGA-3
AC 24 V On/Off Control Two M9220-BGC-3
DC 0 (2) to 10 V Proportional Control No M9220-GGA-3
DC 0 (2) to 10 V Proportional Control Two M9220-GGC-3
VG1000 Series Ball Valves Shown with
Field Mounted M9000 Series Actuators
Amodel® Flow Characterizing Disk —
provides equal percentage flow
characteristics for best temperature
control; available in a wide array of Cv
ranges to cover a broad variety of
applications.
Ethylene Propylene Diene Monomer
(EPDM) Double O-Ring Stem Seal —
offers tested leak-free operation for
200,000 cycles in iron-oxide contaminated
water.
Graphite-Reinforced
Polytetrafluoroethylen (PTFE) Seats —
include 15% graphite-reinforced ball seals
that last twice as long in iron-oxide
contaminated water when compared to
virgin Teflon® ball seats.
PTFE Thermal Spacer — provides thermal
isolation between the actuator and the
valve.
Seats Backed with EPDM O-Rings —
maintain a constant seating force that
compensates for expansion, contraction,
and seat wear without increasing
operating torque.
Maintenance-Free Design — performs
without failure in excess of 200,000 full
stroke cycles in iron-oxide contaminated
water.
Available with Factory-Mounted M9124 or
M9220 Series Electric Actuators —
reduces field installation time and cost.
Flanged Globe or Ball Valves and Actuators
Electric Damper Actuators
Flanged Globe or Ball
Valves and Actuators
Electric Damper Actuators
Flanged Globe or Ball
Valves and Actuators