Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–227
VG1000 Series Flanged Ball Valves
Code No. LIT-1900418
M9000-330 and M9000-340 Weather
Shields Available for Field Installation —
protect the actuator from corrosion, rain,
freezing rain, sleet, and snow.
Repair Information
If the VG1000 Series Ball Valve fails to
operate within its specifications, replace the
valve body, actuator, or entire assembly. For
replacement parts, contact the nearest
Johnson Controls® representative.
Amodel® Flow Characterizing Disk —
provides equal percentage flow
characteristics for best temperature
control; available in a wide array of Cv
ranges to cover a broad variety of
applications.
Ethylene Propylene Diene Monomer
(EPDM) Double O-Ring Stem Seal —
offers tested leak-free operation for
200,000 cycles in iron-oxide contaminated
water.
Graphite-Reinforced
Polytetrafluoroethylene (PTFE) Seats —
include 15% graphite-reinforced ball seals
that last twice as long in iron-oxide
contaminated water when compared to
virgin Teflon® ball seats.
PTFE Thermal Spacer — provides thermal
isolation between the actuator and the
valve.
Seats Backed with EPDM O-Rings —
maintain a constant seating force that
compensates for expansion, contraction,
and seat wear without increasing
operating torque.
Maintenance-Free Design — performs
without failure in excess of 200,000 full
stroke cycles in iron-oxide contaminated
water.
Available with Factory-Mounted M9124 or
M9220 Series Electric Actuators —
reduces field installation time and cost.
Description
VG1000 Series Flanged Ball Valves are
designed primarily to regulate the flow of hot
water, chilled water, and 50% glycol solutions
in response to the demand of a controller in
HVAC systems. The valves come in sizes of
2-1/2, 3, and 4 in. (DN65, DN80, and DN100).
These American Society of Mechanical
Engineers (ASME) Class 150 flanged valves
come in both two- and three-way
configurations. Johnson Controls offers valve,
linkage, and actuator assemblies for factory or
field mounting with either spring-return or
non-spring-return actuators.
Refer to the VG1000 Series Flanged Ball
Valves Product Bulletin (LIT-12011228) for
important product application information.
Features
Closeoff Pressure Rating: 100 psi for
Two-Way Valves; 50 psi for Three-Way
Valves — provides tight shutoff.
300 Stainless Steel Ball and Stem
Assembly — applies to systems with
high-temperature water (0 to 284°F
[-18 to 140°C]) or 25 psi saturated steam.
500:1 Rangeability — provides accurate
control under all load conditions.
Selection Charts
Flanged Stainless Steel Trim Ball Valves with Non-Spring-Return Electric Actuators
Valve Size,
In.
Cv Closeoff
psig
AC 24 V
Without Switches With Two Auxiliary Switches
On/Off (Floating) DC0to10V Proportional On/Off (Floating) DC 0 to 10 V Proportional
M9124-AGA-2 M9124-GGA-2 M9124-AGC-2 M9124-GGC-2
Two-Way
VG12A5GS 2-1/2 47
1
1. Valve has a characterizing disk.
100 VG12A5GS+924AGA VG12A5GS+924GGA VG12A5GS+924AGC VG12A5GS+924GGC
VG12A5GT 74
1
VG12A5GT+924AGA VG12A5GT+924GGA VG12A5GT+924AGC VG12A5GT+924GGC
VG12A5GU 117
1
VG12A5GU+924AGA VG12A5GU+924GGA VG12A5GU+924AGC VG12A5GU+924GGC
VG12A5HT 374
1
100 VG12A5HT+924AGA VG12A5HT+924GGA VG12A5HT+924AGC VG12A5HT+924GGC
VG12A5HU 117
1
VG12A5HU+924AGA VG12A5HU+924GGA VG12A5HU+924AGC VG12A5HU+924GGC
VG12A5HV 176
1
VG12A5HV+924AGA VG12A5HV+924GGA VG12A5HV+924AGC VG12A5HV+924GGC
VG12A5HW 211 VG12A5HW+924AGA VG12A5HW+924GGA VG12A5HW+924AGC VG12A5HW+924GGC
VG12A5JU 4117
1
100 VG12A5JU+924AGA VG12A5JU+924GGA VG12A5JU+924AGC VG12A5JU+924GGC
VG12A5JV 176 VG12A5JV+924AGA VG12A5JV+924GGA VG12A5JV+924AGC VG12A5JV+924GGC
Three-Way
VG18A5GS 2-1/2 47
/ 29
1
50 VG18A5GS+924AGA VG18A5GS+924GGA VG18A5GS+924AGC VG18A5GS+924GGC
VG18A5GT 74
/ 47
1
VG18A5GT+924AGA VG18A5GT+924GGA VG18A5GT+924AGC VG18A5GT+924GGC
VG18A5GU 117
/ 74
1
VG18A5GU+924AGA VG18A5GU+924GGA VG18A5GU+924AGC VG18A5GU+924GGC
VG18A5HT 374
/ 47
1
50 VG18A5HT+924AGA VG18A5HT+924GGA VG18A5HT+924AGC VG18A5HT+924GGC
VG18A5HU 117
/ 74
1
VG18A5HU+924AGA VG18A5HU+924GGA VG18A5HU+924AGC VG18A5HU+924GGC
VG18A5HV 176
/ 88
1
VG18A5HV+924AGA VG18A5HV+924GGA VG18A5HV+924AGC VG18A5HV+924GGC
VG18A5HW 211
/ 105 VG18A5HW+924AGA VG18A5HW+924GGA VG18A5HW+924AGC VG18A5HW+924GGC
VG18A5JU 4117
/ 74
1
50 VG18A5JU+924AGA VG18A5JU+924GGA VG18A5JU+924AGC VG18A5JU+924GGC
VG18A5JV 176
/ 88 VG18A5JV+924AGA VG18A5JV+924GGA VG18A5JV+924AGC VG18A5JV+924GGC
VG1000 Series Ball Valves Shown with
Field Mounted M9000 Series Actuators
Flanged Globe or Ball Valves and Actuators
Electric Damper Actuators
Flanged Globe or Ball
Valves and Actuators
Electric Damper Actuators
Flanged Globe or Ball
Valves and Actuators