Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–196
VG7000 Series Bronze Globe Valves for Assembly in the Field (Continued)
Threaded Globe Valves and Actuators
Technical Specifications
VG7000 Series Bronze Globe Valves for Assembly in the Field
Service
1
1. Refer to the VDI 2035 Guideline for recommended proper water treatment.
Hot Water, and Chilled Water, and Steam with up to 50% Glycol Solution
Cv
Valve Body Sizes
Available
1/2 in. (DN15) 0.73, 1.8, 4.6
3/4 in. (DN20) 7.3
1 in. (DN25) 11.6
1-1/4 in. (DN32) 18.5
1-1/2 in. (DN40) 28.9
2 in. (DN50) 46.2
Stem Travel 1/2 and 3/4 in. Valves 1 and 1-1/4 in. Valve 1-1/2 and 2 in. Valves
Two-Way and Three-Way 5/16 in. 1/2 in. 3/4 in.
Brass Trim Stainless Steel Trim
End Connections NPT, Union Sweat, Globe and Angle NPT
Materials Body Cast Bronze – C84400 Cast Bronze – C83600
Stem Stainless Steel Stainless Steel
Plug Brass Stainless Steel
Seat 3/4 through 2 in.: Machined from Body
1/2 in.: Brass Seat
Stainless Steel
Replaceable Seat
Disk Ethylene Propylene Diene Monomer (EPDM) Stainless Steel
Packing Self-Adjusting Ethylene Propylene Terpolymer
(EPT) U-Cups
Spring-Loaded Polytetrafluoroethylene (PTFE)
Flow
Characteristic
Two-Way Equal Percentage Equal Percentage
Three-Way Linear Linear
Ratings Body ANSI Class 250
2
2. 400 psig (2,758 kPa) for fluid temperatures between 35 and 150°F (2 and 66°C); decreasing to 365 psig (2,515 kPa) at 248°F (120°C).
ANSI Class 250
3
3. 400 psig (2,758 kPa) for fluid temperatures between 35 and 150°F (2 and 66°C); decreasing to 308 psig (2,122 kPa) at 338°F (170°C).
Leakage (Percent of Maximum
Flow)
0.01% 0.05%
Fluid Temperature,
Body Only
4
4. Refer to appropriate actuator literature for ambient limitations due to the actuator.
35 to 284°F (2 to 140°C) 35 to 338°F (2 to 170°C)
Maximum Steam Pressure,
Saturated Steam
38 psig (262 kPa) 100 psig (690 kPa)
Maximum Pressure Drop,
Valve Open
35 psig (1/2 through 1-1/4 in.)
30 psig (1-1/2 and 2 in. Valves)
35 psig (1/2 through 1-1/4 in.)
30 psig (1-1/2 and 2 in. Valves)
Compliance Canada CRN: 0C1099.9087YTN
Threaded Globe Valves and
Actuators
Threaded Globe Valves and
Actuators