Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–147
VA9203-xxx-xx Series Electric Spring-Return Actuators
Description
The VA9203-xxx-xx Series Electric
Spring-Return Ball Valve Actuators are
direct-mount valve actuators that operate on
AC/DC 24 V power. These bidirectional
actuators are used to provide accurate
positioning on Johnson Controls®
VG1000 Series 1/2, 3/4, and 1 in. (DN15,
DN20, and DN25) ball valves in HVAC
applications. A mechanical spring-return
system provides rated torque with or without
power applied to the actuator. The series
includes the following control options:
On/Off, 24 V, or 85 to 264 VAC power
On/Off and Floating Point, 24 V power
Proportional, 24 V power, for 0(2) to
10 VDC or 0(4) to 20 mA Control Signal
An accessory crankarm and remote mounting
kit are available for applications where the
actuator cannot be direct-coupled to the
damper shaft. An optional line voltage
auxiliary switch indicates an end-stop position
or performs switching functions within the
selected rotation range.
Refer to the VA9203-xxx-xx Series Electric
Spring-Return Actuators Product Bulletin
(LIT-12011702) for important product
application information.
VA9203 Series Electric Spring-Return
Valve Actuator
Code No. LIT-1900692
Features
direct mounting with a single screw
electronic stall detection
double-insulated construction
microprocessor-controlled
brushless DC motor
(-AGx and -GGx types)
external mode selection switch
(-AGx and -GGx types)
integral cables with colored and numbered
conductors
integral connectors for 1/2 in. (13 mm)
threaded conduit connector(s)
optional integrated auxiliary switch
plenum rated models
optional thermal barrier
available weather shield for field mounting
override control (Proportional Models only)
Underwriters Laboratories (UL),
CE Mark, and C-Tick Compliance
manufactured under International
Standards Organization (ISO) 9001 Quality
Control Standards
5-year warranty
Accessories and Replacement Parts
Selection Chart
Code Number Description
M9000-200 Commissioning Tool that Provides a Control Signal to Drive 24 V On/Off, Floating, Proportional, and/or Resistive Electric Actuators
M9000-560 Ball Valve Linkage Kit for Applying M9203 and M9208 Series Actuators to VG1000 Series Valves (Quantity 1)
M9000-561 Thermal Barrier Extends M(VA)9104, M(VA)9203, and M(VA)9208 Series Electric Spring-Return Actuator Applications to Include
Low-Pressure Steam (Quantity 1)
M9000-341 Weather Shield Kit for VG1000 Series Ball Valve Application of M(VA)9104, M(VA)9203, and M(VA)9208 Series Electric Spring-Return
Actuators (Quantity 1)
M9000-607 Position Indicator for VG1000 Series Ball Valve Applications (Quantity 5)
Code Number Rotation Time
(Seconds) for 90°
Power
Requirement
Power Consumption Input Signal Position
Feedback
Auxiliary
Switch
Electrical
Connection
Power On — Running
Power Off — Spring Return
24 VAC +/- 20% VDC +20%/-10%
85 to 264 VAC +/- 10%
VA Rating, Transformer Sizing
VA: Running (Holding)
Amperage: Running (Holding)
On/Off
On/Off and Floating Point
0(2) to 10 VDC
0(4) to 20 mA (with 500 Ohm
Resistor)
0(2) to 10 VDC
SPDT, 5.0 A (2.9 A Inductive)
at 240 V
48 in. (1.2 m) 18 AWG
Appliance Cable
120 in. (3.05 m) 19 AWG
Plenum Cable
Integral 3/8 in. FMC Connectors
VA9203-AGA-2Z 90 < 25 ■■6 5.1 (2.8) ■■
VA9203-AGB-2Z 90 < 25 ■■6 5.1 (2.8) ■■
VA9203-BGA-2 < 75 < 75 ■■6 5.0 (2.5) ■■
VA9203-BGB-2 < 75 < 75 6 5.0 (2.5) ■■
VA9203-BUA-2 < 75 < 75 0.06 (0.02) ■■
VA9203-BUB-2 < 75 < 75 0.06 (0.02) ■■
VA9203-GGA-2Z 90 < 25 6 5.1 (2.8) ■■
VA9203-GGB-2Z 90 < 25 6 5.1 (2.8) ■■
Threaded Ball Valves and Actuators
Threaded Ball Valves and
Actuators
Threaded Ball Valves and
Actuators
Threaded Ball Valves and
Actuators
Threaded Ball Valves and
Actuators