Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–142
VG1000 Series Press End Connection Stainless Steel Trim Ball Valves
Description
VG1000 Series Ball Valves are designed to
regulate the flow of hot or chilled water and,
for some models, low-pressure steam in
response to the demand of a controller in
HVAC systems. Available in sizes 1/2 through
1 in. (DN15 through DN25), this family of two-
and three-way forged brass valves is factory
or field mounted to Johnson Controls®
VA9104 Series Non-Spring-Return and
VA9203 Series Spring-Return Electric
Actuators for on/off, floating, or proportional
control. When supplied with an actuator, the
actuator is not mounted to the valve to allow
access to the end connections.
Refer to the VG1000 Series Forged Brass Ball
Valves Product Bulletin (LIT-977132) for
important product application information.
Features
Forged Brass Body — provides 300 psig
static pressure rating.
Graphite-Reinforced
Polytetrafluoroethylene (PTFE) Seats —
include 15% graphite-reinforced ball seals,
providing better wear resistance.
500:1 Rangeability — provides accurate
control under all load conditions.
Maintenance-Free Design — performs
without failure in excess of 200,000 full
stroke cycles in iron-oxide contaminated
water.
Press End Connections — designed to
work with RIDGID® pressing tools,
reducing installation costs.
VG1000 Series Press End Connection
Valves
Selection Charts
VG1000 Press End Connection Valves, Stainless Steel Trim, Non-Spring-Return Actuators with M3 Screw Terminal
Valve Code
Number
Size, in. Cv (Control
Port) / Cv
(Bypass
Port)
Closeoff psig AC 24 V
On/Off (Floating) without
Timeout
1
1. To avoid excessive wear or drive time on the motor for the AGx models, use a controller or software that provides a timeout function to remove the signal at the
end of rotation (stall).
On/Off (Floating) with
Timeout
0 to 10 VDC Proportional
VA9104-AGA-3S
2
2. Code numbers shown are for a VA9104-xGA-3S actuator with M3 screw terminals. To specify a 48-in. plenum rated cable, change 9T4 to 9A4 in the code
number for a VA9104-xGA-2S actuator. For example, VG1241AD+9T4AGA becomes VG1241AD+9A4AGA.
VA9104-IGA-3S
2
VA9104-GGA-3S
2
Two-Way
VG1295AD 1/2 1.2
3
3. Valve has a characterizing disk.
200 VG1295AD+9T4AGA VG1295AD+9T4IGA VG1295AD+9T4GGA
VG1295AE 1.9
3
VG1295AE+9T4AGA VG1295AE+9T4IGA VG1295AE+9T4GGA
VG1295AF 2.9
3
VG1295AF+9T4AGA VG1295AF+9T4IGA VG1295AF+9T4GGA
VG1295AG 4.7
3
VG1295AG+9T4AGA VG1295AG+9T4IGA VG1295AG+9T4GGA
VG1295AL 7.4
3
VG1295AL+9T4AGA VG1295AL+9T4IGA VG1295AL+9T4GGA
VG1295AN 11.7 VG1295AN+9T4AGA VG1295AN+9T4IGA VG1295AN+9T4GGA
VG1295BG 3/4 4.7
3
200 VG1295BG+9T4AGA VG1295BG+9T4IGA VG1295BG+9T4GGA
VG1295BL 7.4
3
VG1295BL+9T4AGA VG1295BL+9T4IGA VG1295BL+9T4GGA
VG1295BN 11.7 VG1295BN+9T4AGA VG1295BN+9T4IGA VG1295BN+9T4GGA
VG1295CL 17.4
3
200 VG1295CL+9T4AGA VG1295CL+9T4IGA VG1295CL+9T4GGA
VG1295CN 11.7
3
VG1295CN+9T4AGA VG1295CN+9T4IGA VG1295CN+9T4GGA
VG1295CP 18.7 VG1295CP+9T4AGA VG1295CP+9T4IGA VG1295CP+9T4GGA
Three-Way
VG1895AD 1/2 1.2
3
200 VG1895AD+9T4AGA VG1895AD+9T4IGA VG1895AD+9T4GGA
VG1895AE 1.9
3
VG1895AE+9T4AGA VG1895AE+9T4IGA VG1895AE+9T4GGA
VG1895AF 2.9
3
VG1895AF+9T4AGA VG1895AF+9T4IGA VG1895AF+9T4GGA
VG1895AG 4.7
3
VG1895AG+9T4AGA VG1895AG+9T4IGA VG1895AG+9T4GGA
VG1895AL 7.4
3
VG1895AL+9T4AGA VG1895AL+9T4IGA VG1895AL+9T4GGA
VG1895AN 11.7 VG1895AN+9T4AGA VG1895AN+9T4IGA VG1895AN+9T4GGA
VG1895BG 3/4 4.7
3
200 VG1895BG+9T4AGA VG1895BG+9T4IGA VG1895BG+9T4GGA
VG1895BL 7.4
3
VG1895BL+9T4AGA VG1895BL+9T4IGA VG1895BL+9T4GGA
VG1895BN 11.7 VG1895BN+9T4AGA VG1895BN+9T4IGA VG1895BN+9T4GGA
VG1895CL 17.4
3
200 VG1895CL+9T4AGA VG1895CL+9T4IGA VG1895CL+9T4GGA
VG1895CN 11.7
3
VG1895CN+9T4AGA VG1895CN+9T4IGA VG1895CN+9T4GGA
VG1895CP 18.7 VG1895CP+9T4AGA VG1895CP+9T4IGA VG1895CP+9T4GGA
Code No. LIT-1900471
Threaded Ball Valves and Actuators
Threaded Ball Valves and
Actuators
Threaded Ball Valves and
Actuators