Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–139
VG1000 Series Sweat End Connection Stainless Steel Trim Ball Valves
Description
VG1000 Series Ball Valves are designed to
regulate the flow of hot or chilled water and,
for some models, low-pressure steam in
response to the demand of a controller in
HVAC systems. Available with Sweat End
Connections in sizes 1/2 through 1 in. (DN15
through DN25), this family of two- and
three-way forged brass valves is factory or
field mounted to Johnson Controls®
VA9104 Series Non-Spring-Return and
VA9203 Series Spring-Return Electric
Actuators for on/off, floating, or proportional
control. When supplied with an actuator, the
actuator is not mounted to the valve to allow
access to the end connections for brazing.
Refer to the VG1000 Series Forged Brass Ball
Valves Product Bulletin (LIT-977132) for
important product application information.
Features
Forged Brass Body — provides 300 psig
static pressure rating.
Graphite-Reinforced
Polytetrafluoroethylene (PTFE) Seats —
include 15% graphite-reinforced ball seals,
providing better wear resistance.
500:1 Rangeability — provides accurate
control under all load conditions.
Maintenance-Free Design — performs
without failure in excess of 200,000 full
stroke cycles in iron-oxide contaminated
water.
VG1000 Series Sweat End Connection
Valves
Selection Charts
VG1000 Sweat End Connection Valves, Stainless Steel Trim, Non-Spring-Return Actuators with M3 Screw Terminal
Valve Code
Number
Size, in. Cv
(Control
Port) / Cv
(Bypass
Port)
Closeoff psig AC 24 V
On/Off (Floating) without
Timeout
1
1. To avoid excessive wear or drive time on the motor for the AGx models, use a controller or software that provides a timeout function to remove the signal at the
end of rotation (stall).
On/Off (Floating) with
Timeout
DC 0 to 10 V Proportional
VA9104-AGA-3S
2
2. Code numbers shown are for a VA9104-xGA-3S actuator with M3 screw terminals. To specify a 120-in. plenum rated cable, change 9T4 to 9A4 in the code
number for a VA9104-xGA-2S actuator. For example, VG1241AD+9T4AGA becomes VG1241AD+9A4AGA.
VA9104-IGA-3S
2
VA9104-GGA-3S
2
Two-Way
VG1275AD 1/2 1.2
3
3. Valve has a characterizing disk.
200 VG1275AD+9T4AGA VG1275AD+9T4IGA VG1275AD+9T4GGA
VG1275AE 1.9
3
VG1275AE+9T4AGA VG1275AE+9T4IGA VG1275AE+9T4GGA
VG1275AF 2.9
3
VG1275AF+9T4AGA VG1275AF+9T4IGA VG1275AF+9T4GGA
VG1275AG 4.7
3
VG1275AG+9T4AGA VG1275AG+9T4IGA VG1275AG+9T4GGA
VG1275AL 7.4
3
VG1275AL+9T4AGA VG1275AL+9T4IGA VG1275AL+9T4GGA
VG1275AN 11.7 VG1275AN+9T4AGA VG1275AN+9T4IGA VG1275AN+9T4GGA
VG1275BG 3/4 4.7
3
200 VG1275BG+9T4AGA VG1275BG+9T4IGA VG1275BG+9T4GGA
VG1275BL 7.4
3
VG1275BL+9T4AGA VG1275BL+9T4IGA VG1275BL+9T4GGA
VG1275BN 11.7 VG1275BN+9T4AGA VG1275BN+9T4IGA VG1275BN+9T4GGA
VG1275CL 17.4
3
200 VG1275CL+9T4AGA VG1275CL+9T4IGA VG1275CL+9T4GGA
VG1275CN 11.7
3
VG1275CN+9T4AGA VG1275CN+9T4IGA VG1275CN+9T4GGA
VG1275CP 18.7 VG1275CP+9T4AGA VG1275CP+9T4IGA VG1275CP+9T4GGA
Three-Way
VG1875AD 1/2 1.2
/ 0.7
3
200 VG1875AD+9T4AGA VG1875AD+9T4IGA VG1875AD+9T4GGA
VG1875AE 1.9
/ 1.2
3
VG1875AE+9T4AGA VG1875AE+9T4IGA VG1875AE+9T4GGA
VG1875AF 2.9
/ 1.9
3
VG1875AF+9T4AGA VG1875AF+9T4IGA VG1875AF+9T4GGA
VG1875AG 4.7
/ 2.9
3
VG1875AG+9T4AGA VG1875AG+9T4IGA VG1875AG+9T4GGA
VG1875AL 7.4
/ 4.7
3
VG1875AL+9T4AGA VG1875AL+9T4IGA VG1875AL+9T4GGA
VG1875AN 11.7
/ 5.8 VG1875AN+9T4AGA VG1875AN+9T4IGA VG1875AN+9T4GGA
VG1875BG 3/4 4.7
/ 2.9
3
200 VG1875BG+9T4AGA VG1875BG+9T4IGA VG1875BG+9T4GGA
VG1875BL 7.4
/ 4.7
3
VG1875BL+9T4AGA VG1875BL+9T4IGA VG1875BL+9T4GGA
VG1875BN 11.7
/ 5.8 VG1875BN+9T4AGA VG1875BN+9T4IGA VG1875BN+9T4GGA
VG1875CL 17.4
/ 4.7
3
200 VG1875CL+9T4AGA VG1875CL+9T4IGA VG1875CL+9T4GGA
VG1875CN 11.7
/ 7.4
3
VG1875CN+9T4AGA VG1875CN+9T4IGA VG1875CN+9T4GGA
VG1875CP 18.7
/ 9.4 VG1875CP+9T4AGA VG1875CP+9T4IGA VG1875CP+9T4GGA
Code No. LIT-1900469
Threaded Ball Valves and Actuators
Threaded Ball Valves and
Actuators
Threaded Ball Valves and
Actuators
Threaded Ball Valves and
Actuators
Threaded Ball Valves and
Actuators