Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–119
VG1000 Series Two-Way, Stainless Steel Trim, NPT End Connections Ball Valves with
Spring-Return Electric Actuators without Switches (Continued)
Threaded Ball Valves and Actuators
Technical Specifications
VG1000 Series Two-Way, Stainless Steel Trim, NPT End Connections Ball Valves with
Spring-Return Electric Actuators without Switches
Service
1
1. Proper water treatment is recommended; refer to the VDI 2035 Guideline.
Hot Water, Chilled Water, 50/50 Glycol Solutions, and 15 psig (103 kPa) Saturated Steam for
HVAC Systems
Fluid Temperature Limits Water -22 to 284F (-30 to 140C)
Steam 15 psig (103 kPa) at 250°F (121°C)
Maximum Actuator Fluid
Temperature Limit
212°F (100°C) VA9203 Series
VA9208 Series
284°F (140°C) VA9203 Series with M9000-561 Thermal Barrier
VA9208 Series with M9000-561 Thermal Barrier
Valve Body Pressure Rating Water 580 psig (4,000 kPa) at 203°F (95°C) (PN40)
464 psig (3,196 kPa) at 284°F (140°C) (PN40)
Steam 15 psig (103 kPa) Saturated Steam
(Applies to VA9203 Series or VA9208 Series Actuators with M9000-561 Thermal Barrier
Installed)
Maximum Closeoff Pressure 200 psid (1,378 kPa)
Maximum Recommended Operating Pressure Drop 50 psid (340 kPa)
Flow Characteristics Two-Way Equal Percentage
Rangeability
2
2. Rangeability is defined as the ratio of maximum controllable flow to minimum controllable flow.
Greater than 500:1
Minimum Ambient Operating
Temperature
-22°F (-30°C) VA9203 Series Spring-Return Actuators
-40°F (-40°C) VA9208 Series Spring-Return Actuators
Maximum Ambient
Operating Temperature
3
(Limited by
the Actuator and Linkage)
3. In steam applications, install the valve with the stem horizontal to the piping and wrap the valve and piping with insulation.
Direct Mount 140°F (60°C): VA9203 or VA9208 Series Spring-Return Actuators
Leakage 0.01% of Maximum Flow per ANSI/FCI 70-2, Class 4
1% of Maximum Flow for Three-Way Bypass Port
End Connections National Pipe Thread (NPT)
Materials Body Forged Brass
Ball 300 Series Stainless Steel
Blowout-Proof Stem 300 Series Stainless Steel
Seats Graphite-Reinforced PTFE with Ethylene Propylene Diene Monomer (EPDM) O-Ring Backing
Stem Seals EPDM Double O-Rings
Characterizing Disk Amodel
® AS-1145HS Polyphthalamide Resin
Threaded Ball Valves and
Actuators
Threaded Ball Valves and
Actuators
Threaded Ball Valves and
Actuators
Threaded Ball Valves and
Actuators