Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–108
VG1000 Series Two-Way, Stainless Steel Trim, NPT End Connections Ball Valves
with Non-Spring-Return Electric Actuators
Features
Forged Brass Body — provides 580 psig
static pressure rating.
200 psi Closeoff Pressure Rating —
provides tight shutoff.
300 Series Stainless Steel Ball and Stem
Assembly — tolerates high-temperature
water or 15 psi saturated steam with fluid
temperatures of -22 to 284F
(-30 to 140C) or where a higher degree of
corrosion protection is desired.
500:1 Rangeability — provides accurate
control under all load conditions.
Repair Information
If the VG1000 Series Ball Valve Assembly fails
to operate within its specifications, replace the
valve body, actuator, or entire assembly. For
replacement parts, contact the nearest
Johnson Controls representative.
Description
VG1000 Series Ball Valves are designed to
regulate the flow of hot or chilled water and,
for some models, low-pressure steam in
response to the demand of a controller in
HVAC systems. Available in sizes 1/2 through
2 in. (DN15 through DN50), this family of
two- and three-way forged brass valves is
factory or field mounted to Johnson Controls®
VA9104, M9106, M9109, and M9100 Series
Non-Spring-Return and VA9203 and VA9208
Series Spring-Return Electric Actuators for
on/off, floating, or proportional control.
Refer to the VG1000 Series Forged Brass
Ball Valves Product Bulletin (LIT-977132) for
important product application information.
Selection Charts
Two-Way Stainless Steel Trim Ball Valves, Non-Spring Return, VA9104 Actuators without Switches
Fluid Temperatures: -4 to 212°F (-20 to 100°C)
Not Rated for Steam Service
AC 24 V
On/Off (Floating)
without Timeout
1
1. To avoid excessive wear or drive time on the motor for the AGx models, use a controller or software that provides a timeout function to remove the signal at the
end of rotation (stall).
On/Off (Floating)
with Timeout
0 to 10 VDC Proportional
Valve Size, in. Cv Closeoff
psig
Actuators with M3 Screw Terminals VA9104-AGA-3S VA9104-IGA-3S VA9104-GGA-3S
VG1245AD 1/2 1.2
2
2. Valve has a characterizing disk.
200 VG1245AD+9T4AGA VG1245AD+9T4IGA VG1245AD+9T4GGA
VG1245AE 1.9
2
VG1245AE+9T4AGA VG1245AE+9T4IGA VG1245AE+9T4GGA
VG1245AF 2.9
2
VG1245AF+9T4AGA VG1245AF+9T4IGA VG1245AF+9T4GGA
VG1245AG 4.7
2
VG1245AG+9T4AGA VG1245AG+9T4IGA VG1245AG+9T4GGA
VG1245AL 7.4
2
VG1245AL+9T4AGA VG1245AL+9T4IGA VG1245AL+9T4GGA
VG1245AN 11.7 VG1245AN+9T4AGA VG1245AN+9T4IGA VG1245AN+9T4GGA
VG1245BG 3/4 4.7
2
200 VG1245BG+9T4AGA VG1245BG+9T4IGA VG1245BG+9T4GGA
VG1245BL 7.4
2
VG1245BL+9T4AGA VG1245BL+9T4IGA VG1245BL+9T4GGA
VG1245BN 11.7 VG1245BN+9T4AGA VG1245BN+9T4IGA VG1245BN+9T4GGA
VG1245CL 17.4
2
200 VG1245CL+9T4AGA VG1245CL+9T4IGA VG1245CL+9T4GGA
VG1245CN 11.7
2
VG1245CN+9T4AGA VG1245CN+9T4IGA VG1245CN+9T4GGA
VG1245CP 18.7 VG1245CP+9T4AGA VG1245CP+9T4IGA VG1245CP+9T4GGA
Actuators with 48 in. (1.2 m) 18 AWG Plenum Cable VA9104-AGA-2S VA9104-IGA-2S VA9104-GGA-2S
VG1245AD 1/2 1.2
2
200 VG1245AD+9A4AGA VG1245AD+9A4IGA VG1245AD+9A4GGA
VG1245AE 1.9
2
VG1245AE+9A4AGA VG1245AE+9A4IGA VG1245AE+9A4GGA
VG1245AF 2.9
2
VG1245AF+9A4AGA VG1245AF+9A4IGA VG1245AF+9A4GGA
VG1245AG 4.7
2
VG1245AG+9A4AGA VG1245AG+9A4IGA VG1245AG+9A4GGA
VG1245AL 7.4
2
VG1245AL+9A4AGA VG1245AL+9A4IGA VG1245AL+9A4GGA
VG1245AN 11.7 VG1245AN+9A4AGA VG1245AN+9A4IGA VG1245AN+9A4GGA
VG1245BG 3/4 4.7
2
200 VG1245BG+9A4AGA VG1245BG+9A4IGA VG1245BG+9A4GGA
VG1245BL 7.4
2
VG1245BL+9A4AGA VG1245BL+9A4IGA VG1245BL+9A4GGA
VG1245BN 11.7 VG1245BN+9A4AGA VG1245BN+9A4IGA VG1245BN+9A4GGA
VG1245CL 17.4
2
200 VG1245CL+9A4AGA VG1245CL+9A4IGA VG1245CL+9A4GGA
VG1245CN 11.7
2
VG1245CN+9A4AGA VG1245CN+9A4IGA VG1245CN+9A4GGA
VG1245CP 18.7 VG1245CP+9A4AGA VG1245CP+9A4IGA VG1245CP+9A4GGA
VG1000 Series Two-Way,
Non-Spring-Return, Stainless Steel
Ball and Stem Ball Valve Assemblies
Code No. LIT-1900220
Threaded Ball Valves and Actuators
Threaded Ball Valves and
Actuators
Threaded Ball Valves and
Actuators