Brochure

VG1000 Series Forged Brass Ball Valves Product Bulletin36
A control signal to Wire 3 of a CW-face (mounted away
from the valve) VA9203 Series or VA9208 Series
actuated spring-to-close floating control valve
assembly drives the electric actuator to the fully CCW
position. Likewise, a control signal to Wire 4 of a
floating CW-face VA9203 Series or VA9208 Series
Actuator, or removal of the control signal from Wire 3 of
an on/off CW-face VA9203 Series or VA9208 Series
actuated spring-to-close valve assembly, drives the
electric actuator to the fully CW position.
Electric Actuator Selection
VG1000 Series Ball Valves are designed for factory or
field mounting to a variety of M9000 and VA9000
Series Actuators. VA9000 Series Actuators include all
hardware necessary for attachment to the valve.
M9000 Series Actuators require an additional linkage.
Refer to Table 32.
Note: To avoid excessive wear or drive time on the
motor for VA9104, M9104, M9106, and M9109 AGx
models, use a controller and/or software that provides
a timeout function to remove the signal at the end of
rotation (stall). The IGx and GGx models have an auto
shutoff to avoid excessive wear or drive time on the
motor.
For more information on these electric actuator series
as well as details on models available, refer to the
following documents:
• VA9104-xGA-2S, -3S Series Electric Non-Spring
Return Valve Actuators Product Bulletin
(LIT-12011050)
• M9104-xGA-2S, -3S Series Electric Non-Spring
Return Actuators Product Bulletin (LIT-1201742)
• M9106-xGx-2 Series Electric Non-spring Return
Actuators Product Bulletin (LIT-2681123)
• M9109 Series Electric Non-spring Return
Actuators Product Bulletin (LIT-120112)
• VA9203 Series Electric Spring Return Actuator
Product Bulletin (LIT-12011702)
• VA9208 Series Electric Spring Return Actuator
Product Bulletin (LIT-12011622)
Linkage Kit and Weather Shield Selection
The M9000-551 and M9000-561 Valve Linkage Kits
and M9000-341 Weather Shield are designed
specifically for field mounting Johnson Controls
M(VA)9104 Series Non-Spring Return and M(VA)9203
and M(VA)9208 Series Spring Return Electric Actuators
to VG1000 Series Ball Valves.
The M9000-516 Valve Linkage Kit and M9000-330
Weather Shield is designed specifically for field
mounting Johnson Controls M9108 Series Non-Spring
Return Electric Actuators to 1-1/4 to 2 in. VG1000
Series Ball Valves. For 1/2 to 1 in. VG1000 Series Ball
Valves, use a VA9104 and M9000-341 Weather Shield.
See Table 36 for valve, actuator, linkage, and weather
shield combinations.
For more information on the M9000-520 Linkage Kit,
refer to the M9000-520 Ball Valve Linkage Kit Product
Bulletin (LIT-1201547) or the M9000-520 Ball Valve
Linkage Kit Installation Instructions
(Part No. 14-1297-5).
For more information on the M9000-551 Linkage Kit,
refer to the M9000-551 Ball Valve Linkage
Kit Installation Instructions (Part No. 34-636-1816).
For more information on the M9000-330 Weather
Shield, refer to the M9000-330 and M9000-340 Series
Weather Shield Enclosures Installation Instructions
(Part No. 14-1330-26).
For more information on the M9000-341 Weather
Shield, refer to the M9000-341 Valve Weather Shield
Kit Installation Instructions (Part No. 34-636-2235).
For more information on the M9000-560 Ball Valve
Linkage, refer to the M9000-560 Ball Valve Linkage Kit
and M9000-561 Thermal Barrier Installation
Instructions (Part No. 34-636-2227).