Install Instructions
Table Of Contents
- Applications
- North American emissions compliance
- United States
- Canada
- Installation
- Parts included
- Location considerations
- Installing the thermostat controller
- Wiring
- Setup and adjustments
- Overview
- Customizing the home screen
- Touchscreen icons
- User lockout
- Using the USB port
- Loading the firmware
- Backing up the settings
- Restoring the settings
- Choosing the Communication mode (TEC3612 and TEC3613 Models)
- Configuring the network settings for wireless models
- Configuring the thermostat controller
- Installer configuration menu
- Screen reset
- Selecting the unit type
- By default, the thermostat controller is configured for four-pipe fan coil mode. To change to a two-pipe or Pressure-Dependent VAV mode:
- Selecting the heating and cooling device type
- Configuring the supply fan - fan coil only
- Setting the Control mode
- Setting the Fan mode - fan coil only
- Configuring the zone space or equipment size - units configured with floating actuators, multi- speed fans, and variable-speed fans only
- Changeover
- Dehumidification control - fan coil only
- Temperature setpoints
- Configuring occupancy
- Selecting schedule source
- Scheduling (for networked models)
- Setting the local schedule
- Overriding the Occupancy mode
- Enabling optimal start
- Enabling the motion sensor (TEC3x12, TEC3x13 Models)
- PID/PRAC+ automatic control tuning
- Configurable binary inputs
- Aux control
- Commissioning mode
- Configurable analog inputs (AIs)
- Configuring the AIs
- Networked sensors
- Availability of AIs
- Priority for configurable AIs
- Priority for overall sensors data sources
- Available fault diagnostics
- Menus and submenus
- Troubleshooting
- Repair information
- Technical specifications
- TEC3000 Series Networked and Wireless On/Off or Floating Fan Coil and Individual Zone Thermostat Controllers with Dehumidification Capability (Part 1 of 3)
TEC3000 Series Networked and Wireless On/Off or Floating Fan Coil and Individual Zone Thermostat Controllers
with Dehumidification Capability Installation Guide
47
Table 14: TE-6300 Series Temperature Sensors (order separately) (for wireless TEC Models) (Part 1 of 2)
Sensor type Mounting style Probe length Product code number
Nickel
(1k ohm)
Adjustable
1
8 in. (203 mm) TE-6311A-1
Averaging 8 ft (2.4 m) TE-6315M-1
TE-6315V-2
1
17 ft (5.2 m) TE-6316M-1
TE-6316V-2
1
Duct 4 in. (102 mm) TE-631GM-1
8 in. (203 mm) TE-6311M-1
TE-6311P-1
18 in. (457 mm) TE-631JM-1
Flange 4 in. (102 mm) TE-631GV-2
8 in. (203 mm) TE-6311V-2
Flush N/A TE-6310F-0
TE-6310F-1
Outside air 3 in. (76 mm) TE-6313P-1
Strap-mount 3 in. (76 mm) TE-631S-1
Wall
2
N/A TE-6314P-1
Well 6 in. (152 mm) TE-631AM-2
8 in. (203 mm) TE-6312M-1
Platinum
(1k ohm)
Adjustable 8 in. (203 mm) TE-6351-A
Duct 4 in. (102 mm) TE-635GM-1
8 in. (203 mm) TE-6351M-1
TE-6351P-1
18 in. (457 mm) TE-635JM-1
Flange 4 in. (102 mm) TE-635GV-2
8 in. (203 mm) TE-6351V-2
Flush N/A TE-6350F-0
TE-6350F-1
Strap-mount 3 in. (76 mm) TE-635S-1
Outside air 3 in. (76 mm) TE-6353P-1
Wall
2
N/A TE-6324P-1
Well 6 in. (152 mm) TE-635AM-2
8 in. (203 mm) TE-6352M-1
Platinum
equivalent
1k ohm averaging
1
10 ft (3 m) TE-6327P-1
20 ft (6.1 m) TE-6328P-1
100 ohm averaging
1
10 ft (3 m) TE-6337P-1
20 ft (6.1 m) TE-6338P-1