Product Overview

ManualsBrandsJohnson Controls ManualsHeating SuppliesTEC3000 BACnet or N2 Networked Thermostat Controller

The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.

Code No. LIT-1901109

Issued June 2019

Description

The TEC3000 Color Series Thermostat

Controllers are wireless, stand-alone, and

field-selectable BACnet® MS/TP or N2

networked devices that provide on/off,

floating, and proportional control of the

following:

• Local hydronic reheat valves

• Pressure-dependent VAV equipment with

or without local reheat

• Two- or four-pipe fan coils

• Cabinet unit heaters

• Other zoning equipment using an on/off,

floating, or 0 to 10 VDC proportional control

input

• Single- or two-stage control of unitary

rooftop units (RTUs)

• Single- or two-stage control of RTUs with

economizers

• Single- or two-stage control of heat pumps

with economizers

You can remote monitor and program the

wireless and field-selectable BACnet MS/TP

or N2 networked thermostat controllers

through the building automation system, for

efficient space temperature control. The

wireless thermostat controllers feature a

connection to the ZFR Pro wireless network.

All models include a USB port configuration

that reduces installation time by allowing

simple backup and restore features from a

USB drive, which enables rapid cloning of

configuration between like units. The

programming memory of all TEC3000 Series

Thermostat Controllers is non-volatile.

Some models feature a built-in occupancy

sensing capability. These thermostat

controllers use additional standby setpoints to

maximize up to 30% energy savings in high-

energy usage commercial buildings, such as

schools and hotels, during occupied times.

A bright, high-definition capacitive

touchscreen display provides responsive

feedback and improved readability of text and

icons. The home screen is configurable to

Modern and Classic, and Light and Dark

themes.

Models are available in modern black or white

high-gloss designs with or without the Johnson

Controls® logo.

The following fan configurations are supported

for fan coil equipment types:

• Single-speed

• Multi-speed (two or three discrete speeds)

• Variable-speed/EC motors (0 to 10 VDC

control)

All models support dehumidification on two-

pipe fan coil units with reheat, and four-pipe

fan coil units with or without reheat.

When no heating is required and mechanical

cooling is available, the thermostat controller

monitors space humidity and activates

dehumidification control as necessary. Heat or

reheat is used as required to maintain the

space temperature.

For optimal dehumidification performance,

use a fan coil unit that includes a multi-speed

or variable-speed fan (VSF).

Refer to the TEC3000 Color Series Wireless,

Stand-Alone, and Field-Selectable BACnet®

MS/TP or N2 Networked Thermostat

Controllers Product Bulletin (LIT-12013193)

for important product application information.

Features and benefits

• Two configurable binary inputs—

Provide additional inputs for advanced

functions such as remote night setback,

service or filter alarms, motion detector,

and window status.

• Field-Selectable BACnet MS/TP or N2

Networked Communication (TEC36xx-

1x-000 Models)—Simplifies the upgrade

from N2 networked communication to

BACnet MS/TP networked communication

without changing hardware.

• USB port configuration—Rapidly clone

the configuration between like units

through simple backup and restore

features from a USB drive to reduce

installation time.

• Programmable in seven languages—

Provides English, Spanish, French,

German, Italian, Dutch, Portuguese

(requires a downloadable language pack)

• Backlit full-color liquid crystal display

(LCD)—Offers an intuitive color backlit

display that makes setup and operation

quick and easy. The new display features

on all models and offers real-time control

status of the environment in easy-to-read,

plain text messages with an adjustable

backlight that brightens during user

interaction.

• Configurable touchscreen UI—Facility

managers can limit the user interaction with

the thermostat controller display based on

specific energy policies.

• Various models available—Offers

models in modern black

or white

high-

gloss designs with or without the Johnson

Controls logo.

1. The color code of the black used for the

TEC3000 Color Series is: hex #2d2926 or

RAL 9017.

2. The color code of the white used for the

TEC3000 Color Series is: hex #F4F5F0 or

RAL 9016

TEC3000 Color Series Wireless, Stand-Alone, and Field-Selectable BACnet® MS/

TP or N2 Networked Thermostat Controllers Catalog Page

• End-of-line switch—Simplifies the layout

and installation of communication buses.

• Mobile Access Portal (MAP) Gateway

compatibility (MAP Release 4.0 or

later)—View the equipment and control the

conditions through your mobile devices.

• Onboard occupancy sensor (TEC3031-

1x-000 and TEC3xx3-1x-000 Models)—

Provides energy savings in high-energy

usage commercial buildings without

additional installation time or cost.

• Integral humidity sensor—Monitors

space humidity on all models. Activates

dehumidification control on two-pipe fan

coil units with reheat and four-pipe fan coil

units with or without reheat.

• Multiple fan configurations for fan coil

equipment types—Provide field-

selectable single-speed, multi-speed, and

variable-speed fan control capabilities.

• Full line of remote TE-6300 Series

Temperature Sensors—Support a wide

usage commercial buildings without

additional installation time or cost.

• Built-in schedule object—Allows all

wireless and wired models of thermostat

controllers to be scheduled as stand-alone

devices; allows wireless and BACnet MS/

TP models to be defined and adjusted

through the building automation system.

• Optimal start—Allows each thermostat

controller to anticipate the heating or

cooling needs of a space by starting the

equipment early enough to reach the

setpoint at the beginning of the scheduled

occupancy.

TEC3000 Color Series Thermostat

Controller shown with and without

occupancy sensor in white and black

enclosures

Summary of content (7 pages)

PAGE 1
Code No.
PAGE 2
TEC3000 Color Series Wireless, Stand-Alone, and Field-Selectable BACnet® MS/TP or N2 Networked Thermostat Controllers Catalog Page (Continued) • • Auto-tuned control loops—Reduce commissioning time, eliminate change-ofseason recommissioning, and reduce wear and tear of the mechanical devices. Load shed—Commands a load shed input to offset the heating and cooling setpoints by a fixed amount on networked models. The change rate of the setpoints is adjustable.
PAGE 3
TEC3000 Color Series Wireless, Stand-Alone, and Field-Selectable BACnet® MS/TP or N2 Networked Thermostat Controllers Catalog Page (Continued) Wireless thermostat controller models (Continued) Code number Control output Occupancy Dehumidification Johnson Controls logo Color TEC3031-13-000 Single- or two-stage RTU/ heat pump with economizer Single- or two-stage RTU/ heat pump with economizer Single- or two-stage RTU/ heat pump with economizer Single- or two-stage RTU/ heat pump with economizer Yes N
PAGE 4
TEC3000 Color Series Wireless, Stand-Alone, and Field-Selectable BACnet® MS/TP or N2 Networked Thermostat Controllers Catalog Page (Continued) Stand-alone thermostat controller models (Continued) Code number Control output Occupancy Dehumidification Johnson Controls logo Color TEC3330-15-000 Single- or two-stage RTU/ heat pump with economizer Single- or two-stage RTU/ heat pump with economizer Single- or two-stage RTU/ heat pump with economizer Single- or two-stage RTU/ heat pump with economizer Sing
PAGE 5
TEC3000 Color Series Wireless, Stand-Alone, and Field-Selectable BACnet® MS/TP or N2 Networked Thermostat Controllers Catalog Page (Continued) Field-selectable BACnet MS/TP or N2 Networked Thermostat Controller models (Continued) Code number Control output Occupancy Dehumidification Johnson Controls logo Color TEC3630-13-000 Single- or two-stage RTU/ heat pump with economizer Single- or two-stage RTU/ heat pump with economizer Single- or two-stage RTU/ heat pump with economizer Single- or two-stage R
PAGE 6
TEC3000 Color Series Wireless, Stand-Alone, and Field-Selectable BACnet® MS/TP or N2 Networked Thermostat Controllers Catalog Page (Continued) Technical specifications TEC3000 Color Series Thermostat Controllers Power requirements 19 to 30 VAC, 50/60 Hz, 4 VA at 24 VAC nominal, Class 2 or safety extra-low voltage (SELV) 120 to 250 mA current draw supported 0 to 10 VDC into 2k ohm resistance (minimum) 19 to 30 VAC, 1.0 A maximum, 15 mA minimum, 3.
PAGE 7
TEC3000 Color Series Wireless, Stand-Alone, and Field-Selectable BACnet® MS/TP or N2 Networked Thermostat Controllers Catalog Page (Continued) TEC3000 Color Series Thermostat Controllers (Continued) Compliance BACnet International United States Canada Europe (for networked models only) Shipping weight Australia and New Zealand Models without occupancy sensor Models with occupancy sensor BACnet Testing Laboratories™ (BTL) 135-2001 Listed BACnet Advanced Application Controller (B-AAC) UL Listed, File E