Submittal Sheet

TEC3000 Color Series Wireless, Stand-Alone, and Field-Selectable BACnet® MS/TP or N2 Networked Thermostat
Controllers Product Bulletin
3
Features and benefits
Table 1: Features and benefits
Feature Benefit
Two configurable binary inputs Provide additional inputs for advanced functions such as remote night
setback, service or filter alarms, motion detector, and window status.
Field-Selectable BACnet MS/TP or N2
Networked Communication (TEC36xx-1x-000
Models)
Simplifies the upgrade from N2 networked communication to BACnet
MS/TP networked communication without changing hardware.
USB port configuration Rapidly clone the configuration between like units through simple backup
and restore features from a USB drive to reduce installation time.
Programmable in seven languages Provides English, Spanish, French, German, Italian, Dutch, Portuguese
(requires a downloadable language pack)
Backlit full-color liquid crystal display (LCD) Offers an intuitive color backlit display that makes setup and operation
quick and easy. The new display features on all models and offers
real-time control status of the environment in easy-to-read, plain text
messages with an adjustable backlight that brightens during user
interaction.
Configurable touchscreen UI Facility managers can limit the user interaction with the thermostat
controller display based on specific energy policies.
Various models available Offers models in modern black
1
or white
2
high-gloss designs with or
without the Johnson Controls logo.
1. The color code of the black used for the TEC3000 Color Series is: hex #2d2926 or RAL 9017
2. The color code of the white used for the TEC3000 Color Series is: hex #F4F5F0 or RAL 9016
End-of-line switch Simplifies the layout and installation of communication buses.
Mobile Access Portal (MAP) Gateway
compatibility (MAP Release 4.0 or later)
View the equipment and control the conditions through your mobile
devices.
Onboard occupancy sensor (TEC3031-1x-000
and TEC3xx3-1x-000 Models)
Provides energy savings in high-energy usage commercial buildings
without additional installation time or cost.
Integral humidity sensor Monitors space humidity on all models. Activates dehumidification control
on two-pipe fan coil units with reheat and four-pipe fan coil units with or
without reheat.
Multiple fan configurations for fan coil equipment
types
Provide field-selectable single-speed, multi-speed, and variable-speed fan
control capabilities.
Full line of remote TE-6300 Series Temperature
Sensors (See Table 5)
Support a wide range of remote temperature sensing needs from a single
supplier.
Built-in schedule object Allows all wireless and wired models of thermostat controllers to be
scheduled as stand-alone devices; allows wireless and BACnet MS/TP
models to be defined and adjusted through the building automation
system.
Optimal start Allows each thermostat controller to anticipate the heating or cooling
needs of a space by starting the equipment early enough to reach the
setpoint at the beginning of the scheduled occupancy.
Auto-tuned control loops Reduce commissioning time, eliminate change-of-season
recommissioning, and reduce wear and tear of the mechanical devices.
Load shed Commands a load shed input to offset the heating and cooling setpoints by
a fixed amount on networked models. The change rate of the setpoints is
adjustable. The load shed feature is in place to help satisfy the California
Title 24 requirements that are defined in joint appendix JA5, section
JA5.2.4 for demand signal response. The trigger for this event is defined
in another controller and passed through the network command.