Submittal Sheet

Refer to the QuickLIT website for the most up-to-date version of this document.
TEC3000 Color Series Wireless, Stand-Alone, and Field-Selectable
BACnet® MS/TP or N2 Networked Thermostat Controllers
Product
Bulletin
1
Introduction/overview
The TEC3000 Color Series Thermostat Controllers are
wireless, stand-alone, and field-selectable BACnet®
MS/TP or N2 networked devices that provide on/off,
floating, and proportional control of the following:
Local hydronic reheat valves
Pressure-dependent VAV equipment with or
without local
reheat
Two- or
four-pipe fan coils
Cabinet unit heater
s
Other zoning equipment using an on/off, floating
,
or 0 to 10 VDC proportional control input
Single- or two-stage control of unitary rooftop un
its
(R
TUs)
Single- or two-stage control of RTUs
with
ec
onomizers
Single- or two-stage control of heat pumps
Single- or two-stage control of heat pumps
with
ec
onomizers
You can remote monitor and program the wireless and
field-selectable BACnet MS/TP or N2 networked
thermostat controllers through the building automation
system, for efficient space temperature control. The
wireless thermostat controllers feature a connection to
the ZFR Pro wireless network. All models include a
USB port configuration that reduces installation time by
allowing simple backup and restore features from a
USB drive, which enables rapid cloning of configuration
between like units. The programming memory of all
TEC3000 Series Thermostat Controllers is non-volatile.
Some models feature a built-in occupancy sensing
capability. These thermostat controllers use additional
standby setpoints to maximize up to 30% energy
savings in high-energy usage commercial buildings,
such as schools and hotels, during occupied times.
A bright, high-definition capacitive touchscreen display
provides responsive feedback and improved readability
of text and icons. The home screen is configurable to
Modern and Classic, and Light and Dark themes.
Models are available in modern black or white high-
gloss designs with or without the Johnson Controls®
logo.
The following fan configurations are supported for fan
coil equipment types:
Single-speed
Multi-speed (two or three discrete spee
ds)
Variable-speed/EC motors (0 to 10 VDC control)
Figure 1: TEC3000 Color Series Thermostat
Controller shown with and without occupancy
sensor in white and black enclosures
TEC3000 Color Series Wireless, Stand-Alone, and
Field-Selectable BACnet® MS/TP or N2 Networked Thermostat
Controllers
Product Bulletin
TEC30xx-1x-000, TEC33xx-1x-000, TEC36xx-1x-000
Code No. LIT-12013193
Issued June 2019

Summary of content (13 pages)