Brochure

The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2012 Johnson Controls, Inc.
www.johnsoncontrols.com
2 of 3
Hardware Assemblies for TE-6000 Sensors (Continued)
TE-6001-2 Description
The TE-6001-2 is a metal housing used with the TE-6000 temperature
element in applications requiring outside air temperature sensing. A
factory-mounted plastic clip is provided to hold the TE-6000 sensor in
place.
TE-6001-2 Metal Housing
TE-6001-2 Metal Housing Dimensions, (in./mm)
1-5/16
33
7/8
22
1-1/4
32
1-5/16
33
4-1/2
114
TE-6001-3 Description
The TE-6001-3 packing nut, fittings, and handi-box are used with
WZ-1000-2, -4 and -5 immersion wells to house TE-6000 elements in
well insertion applications.
TE-6001-3 Kit
TE-6001-3 Kit Dimensions, (in./mm)
13/16
20.5
Knockout for
1/2 in. Conduit
(Top and Bottom)
1-3/32
27.5
2-3/16
55
1-1/16
27
17/32
13.5
13/16
20.5
13/16
20.5
1/4
6
Holes (4)
4-3/16
106
17/32
13.5
2-1/8
54
13/16
20.5
13/16
20.5
13/16
20.5
1-1/16
27
Knockouts for
1/2 in. Conduit
(Both Sides)
TE-6001-4 Description
The TE-6001-4 temperature element holder is used with TE-6000
sensors in room-sensing applications. The TE-6001-4 can hold up to
two temperature sensors. A mounting bracket and wallplate adapter
are supplied. A T-4000 cover is required and must be ordered
separately. See the Accessories table.
TE-6001-4 Temperature Element Holder
TE-6001-4 Temperature Element Holder Dimensions, (in./mm)
2-3/32
53
Clearance: Allow
3-1/2 in. (89 mm) each
side for cover screw
removal with
T-4000 Allen wrench.
4-1/2
114
2-3/4
70
1-13/16
46
1/8
3
1/16 in.
Allen-head Screw
(Each Side)
3-1/8
79