Brochure

The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2012 Johnson Controls, Inc.
www.johnsoncontrols.com
1 of 3
TE-6001 Series
Hardware Assemblies for TE-6000 Sensors
Code No. LIT-1922230
Issued April 2, 2001
Description
TE-6001 hardware assemblies
are used in conjunction with the
TE-6000 Series elements in a
wide variety of temperature-
sensing applications.
Repair Information
If the TE-6001 Series Hardware
Assemblies for TE-6000 Sensors
fail to operate within their
specifications, replace the unit.
For replacement assemblies,
contact the nearest Johnson
Controls® representative.
Applications
The TE-6001 assemblies used in
conjunction with the TE-6000
sensors cover a wide range of
sensing applications including:
• duct
• immersion
• dew point
• outside air
•room
There are also two additional
TE-6001 assemblies
(TE-6001-961 and TE-6001-962),
which are available for auxiliary
pushbutton and toggle switch
applications.
Accessories (T-4000 Plastic Covers For TE-6001-4)
Code Number Description
T-4000-2139 Horizontal Without setpoint window or thermometer, with JCI logo, silver faceplate
T-4000-2140 Without setpoint window, with F/C thermometer and JCI logo, silver faceplate
T-4000-2639 Concealed setpoint, without thermometer, with JCI logo, gold faceplate
T-4000-2640 Concealed setpoint, with thermometer and JCI logo, gold faceplate
T-4000-2138 Horizontal or Vertical Without setpoint window, thermometer, or JCI logo, with silver faceplate
T-4000-2144 Vertical Without setpoint window or thermometer, with JCI logo and silver faceplate
Selection Chart
Code
Number
Description
TE-6001-1 Duct temperature element holder with handi-box
TE-6001-2 Housing for outside air temperature sensing element
TE-6001-3 Packing nut and fittings for use with WZ-1000 wells in
immersion well applications
TE-6001-4 Single/dual element holder for TE-6000 elements in room
temperature sensing applications
TE-6001-5 Dew point sensor kit
TE-6001-6 10 adhesive mounting pads for use with T-4100, T-4110
TE-6001-7 10 clips for use with T-4002/4003 and H-4100/5100
TE-6001-8 Mounting bracket for use with TE-6100 and TE-6300 averaging
sensors
TE-6001-11 Duct temperature and humidity element holder (without the
handi-box)
TE-6001-961 Momentary pushbutton switch
TE-6001-962 Maintained toggle switch
TE-6001-1 Description
The TE-6001-1 duct temperature element holder is used with TE-6000
elements in duct insertion applications. The TE-6001-1 is designed to
hold one or two temperature sensors. A handi-box is supplied with the
element holder.
TE-6001-1 Duct Temperature Element Holder
TE-6001-1 Duct Temperature Element Holder
Dimensions, (in./mm)
2-3/16
55
4-3/16
106
9-3/16
233