Product Overview
Table Of Contents
- Features and Benefits
- Introduction
- Operating Differential
- Installation
- Supplies Needed
- Location Considerations
- Dimensions
- Mounting and Wiring
- Table 1: Electrical Ratings
- Adjustments
- Range Stops
- Checkout Procedure
- Dial Lock
- Repairs and Replacement
- Ordering Information
- Table 2: Ordering Information
- Table 3: Faceplate Ordering Information (For T26 Thermostats with Plastic Cover)
- Accessories
- Faceplates Double Control Trim Plates
- Brand Name Faceplates
- Energy Conservation Models
- Concealed Adjustment Faceplates
- Thermostat Guards
- Replacement Parts
- Table 4: Replacement Parts
- Specifications
T26 Series Line Voltage Thermostats Product/Technical Bulletin 3
Location Considerations
Locate the T26 thermostat as follows:
• on a partitioning interior wall, and approximately
5 ft (1.5 m) above the floor in a location of average
temperature
• away from direct sunlight or radiant heat, outside
walls or behind doors, air discharge grills,
stairwells, or outside doors
• away from steam or water pipes, warm air stacks,
or heated/uncooled areas
Dimensions
2.96
75
1.28
33
0.69
18
6-32 Mounting
Screws (Two Places)
1.27
32
0.25
6
1.34
34
4.71
120
2.34
59
3.22
82
1.20
30
1.41
36
0.80
20
Figure 4: T26 Dimensions (in./mm)
Mounting and Wiring
Optional Concealed
Adjustment Faceplate
Adjustment
Knob
Mounting Plate
Locking Screw
Vertical
Faceplate
Mounting
Plate
Wall
Box
Cover Locking Screw
Grounding
Screw
Figure 5: T26 Series Thermostat