Submittal Sheet

The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2011 Johnson Controls, Inc.
www.johnsoncontrols.com
Restrictors (Continued)
Inline Adjustable
R-3710-2010 Inline adjustable restrictor, pin valve
type. Test gauge plugs are available
on high and low side of restrictor.
R-3710 Series Restrictors (Part 2 of 2)
Code
Number
Description
Out
In
1 in. (25mm)
Length of 1/4 in.
(Field Furnished)
F-700-73
(Field Furnished)
F-1000-361
Sealing Cap
(Field Furnished)
R-3710-2010
Adjustable Pin
Valve WIth
Two 3/4 in. (19mm)
Lengths of
5/32 in. Tubing
and Two
1/4 x 5/32 in.
Couplings
Tubing
Test Point
1/4 x 1/4 x 1/4 in.
Barbed Tee
R-3710-2010 5/32 in. Tube Connections for
Polytubing
R-3710 Color/Size Information (Part 2 of 2)
Code
Number
Color / Size
Repair Information
If the R-3710 Series Restrictor fails to operate
within its specifications, replace the unit. For
a replacement restrictor, contact the nearest
Johnson Controls® representative.
Technical Specifications
R-3710 Series Restrictors
Material R-3710-3005, 3007, -3205, -3207, -3105, -3107, -2005, -2007 Thermoplastic
R-3710-1005, -1007 Elastomeric O-Ring, Zinc Plated Compression Nut,
(Identifies Restrictor location) and Thermoplastic Ferrule
R-3710-2010 Brass
Maximum Pressure R-3710-3005, 3007, -3205, -3207, -3105, -3107, -2005, -2007, -1005, -1007 25 psig (175 kPa)
R-3710-2010 100 psig (700 kPa)
Maximum Temperature 180°F (82°C)
Output Flow Capacity
at 20 psig
R-3710-3005, -3205, -3105, -2005, -1005 25 SCIM (6.8 mLs)
R-3710-3007, -3207, -3107, -2007, -1007 45 SCIM (12.3 mLs)
R-3710-2010 Adjustable