Product Overview

ManualsBrandsJohnson Controls ManualsFan Controls60" CAP, Electronic Fan Speed Controls (320-410 PSIG)

Table Of Contents

P66 Series Electronic Fan Speed Controls Product Bulletin 1

The P66 Series Electronic Fan Speed Controls are

refrigerant pressure actuated, electronic motor-speed

controllers. The P66 controls are designed for use with

single-phase permanent split-capacitor motors that are

approved by the motor manufacturer for speed control

applications.

The P66 controls provide condenser pressure control

by directly sensing condenser refrigerant pressure and

automatically adjusting the condenser fan motor speed

according to the sensed pressure.

The P66 provides an alternative to fan cycling control

in many small and medium size refrigeration and

Heating, Ventilating, and Air Conditioning (HVAC)

applications.

Figure 1: P66 Dual Sensor Fan Speed Control

Table 1: Features and Benefits

Features Benefits

Exclusive Johnson Controls/PENN®

Pressure Transducer

Responds quickly to condenser pressure changes and condenser air delivery

requirements

Soft Start Capability Provides a smooth fan startup, which reduces motor-starting noise and abrupt

changes in motor speed

208-240/277/480 VAC, 60 Hz Motor

Control

Suitable for a wide range of condenser fan motor applications

One or Two Pressure Transducers Applicable to single- and multi-circuit condensers. The dual-sensor P66 control

models select the higher pressure input to control the fan speeds.

Two Effective Throttling Ranges

(ETRs)

Provide either a 30 or 60 psi (207 or 414 kPa) ETR

NEMA 1 or NEMA 3R (Rainproof)

Enclosure

Allows indoor and panel mounting or outdoor mounting applications

Built-in Voltage Surge Protection,

Radio Frequency Interference (RFI)

Suppression, and Ground Terminal

Screw

Achieves trouble-free operation

P66 Series Electronic Fan Speed Controls

Product Bulletin

Code No. LIT-125465

Issued March 23, 2006

Supersedes September 23, 2004

Summary of content (7 pages)

PAGE 1
P66 Series Electronic Fan Speed Controls Product Bulletin Code No. LIT-125465 Issued March 23, 2006 Supersedes September 23, 2004 The P66 Series Electronic Fan Speed Controls are refrigerant pressure actuated, electronic motor-speed controllers. The P66 controls are designed for use with single-phase permanent split-capacitor motors that are approved by the motor manufacturer for speed control applications.
PAGE 2
Application IMPORTANT: Use P66 Series Electronic Fan Speed Controls only as operating controls. Where failure or malfunction of the P66 control could lead to personal injury or property damage due to the controlled equipment or other property, additional precautions must be designed into the control system. Incorporate and maintain other devices such as supervisory or alarm systems or safety or limit controls intended to warn of, or protect against, failure or malfunction of the P66 controls.
PAGE 3
97% Motor Voltage 90% 10% to 40% of Line (Model Specific) No fan operation in this pressure range. 0 psig Operating Range (190/250 psig) Operating Range Plus 20 or 30 psi* Pressure Input 350 psig *20 psi for 30 psi Effective Throttling Range (ETR) 30 psi for 60 psi Effective Throttling Range (ETR) Figure 2: Operation Chart for the P66 Fan Speed Control Table 2: P66 Control Operation Pressure Input Motor Voltage Pressure is between 0 psig and the low end of the operating range.
PAGE 4
0.218 Diameter Mounting Holes 5.54 for No. 10 Screw Two 0.250 Spade Terminals for 24 VAC Power Supply Inside Plug (NEMA 1 Enclosure) 6.75 172 5.33 135 6.00 152 5.26 134 Valve Depressor 7/16 in. 20 UNF-2B 3.38 86 4.56 116 4.20 107 0.27 7 4.72 120 1/4 in. Flare 1.28 33 Two 22 AWG Wire Leads for 24 VAC Power Supply (NEMA 3R Enclosure) 0.875 Diameter 22.23 Conduit Hole (2 places) NEMA 3R Enclosure 3.34 85 4.12 105 Figure 3: P66 Control and NEMA 3R Enclosure Dimensions, in.
PAGE 5
Ordering Information Table 3: P66 Series Control Model Information1 Product Code Number Operating Pressure Range (psig) Start Voltage (% of Supply Voltage) Capillary Length (in.
PAGE 6
Table 4: Fan Speed Control Replacement Guide (Part 2 of 2)1 Original Control Model Number Replacement P66 Product Code Number P15JJ-7 P66ABB-21C P15JJ-8 P66AAB-1C P65AAB-1 P66AAB-1C P65AAB-2 P66AAB-1C P65AAB-4 P66AAB-4C P65AAB-6 P66AAB-6C P65AAB-9 P66AAB-9C P65AAB-10 P66AAB-10C P65BAB-1 P66BAB-1C P65BAB-2 P66BAB-1C P65BAB-5 P66BAB-5C P65AAB-2 P66AAB-1C P66AAB-18 P66AAB-25C P66AAB-21 P66ABB-21C P66BAB-2 P66BAB-1C P66BAB-4 P66BAB-1C 1.
PAGE 7
P66 Series Electronic Fan Speed Controls (Part 2 of 2) Electrical Ratings: 277 VAC Full Load Amperes: 6.9 Locked Rotor Amperes: 14.3 Ambient Temperature Maximum: 130°F/54°C Electrical Ratings: 480 VAC Full Load Amperes: 4.0 Locked Rotor Amperes: 10.