Product Overview

Published in U.S.A. www.johnsoncontrols.com
P266 Series Single-Phase Condenser Fan Speed Control Product Bulletin 7
Johnson Controls/PENN® are registered trademarks of Johnson Controls, Inc.
All other marks herein are the marks of their respective owners. © 2010 Johnson Controls, Inc.
Building Efficiency
507 E. Michigan Street, Milwaukee, WI 53202
Technical Specifications
P266xxx-x Series Single Phase Condenser Fan Speed Controls
Input Supply Power 208/240 VAC 50/60 Hz, 380/460 VAC 50/60 Hz, or 460/575 VAC 50/60 Hz, depending on
the model (Refer to the label inside the P266 Series control housing cover for rated
voltage range and model-specific wiring diagram.)
Short Circuit Current Rating Suitable For Use On A Circuit Capable Of Delivering Not More Than 5,000 rms
Symmetrical Amperes, 600 Volts Maximum When Protected By Class H Fuses.
Low-Voltage Power Supply P266A, P266B, and P266C Types: External 24 VAC Class 2, 20 VA Supply Transformer
P266E Types: Low-voltage power for P266 Series control is provided by an onboard
transformer.
Note: When auxiliary fan starters are connected to P266E type controls, you must
provide an external Safety Extra-Low Voltage (SELV) AC supply to power the fan
starters.
Ambient Operating Conditions Temperature: -40 to 60°C (-40 to 140°F)
Humidity: Up to 95% RH non-condensing; Maximum Dew Point 29°C (85°F)
Ambient Shipping and Storage
Conditions
Temperature: -40 to 85°C (-40 to 185°F)
Humidity: Up to 95% RH non-condensing; Maximum Dew Point 29°C (85°F)
Low-Voltage Connections 1/4 in. Quick-Connect terminals, 30 m (100 ft) maximum wiring runs
Input Transducer P266SNR-x Pressure Transducer: 5 VDC for 0.5 to 4.5 VDC ratiometric analog signal
Enclosure Type NEMA 3R, IP54
Case Construction Aluminum Die Casting
Cover Construction UV Stabilized Polycarbonate
Dimensions (HxWxD) 159 x 177 x 70 mm (6-1/4 x 7 x 2-3/4 in.)
Weight Heaviest Model Weight: 1.0 kg (2.2 lb)
Approximate Shipping Weight: 1.2 kg (2.6 lb)
Compliance Europe: Mark: CE Compliant; CENELEC EN 60947-1 & 4-2;
RoHS Directive (2002/95/EC); WEEE Directive (2002/96/EC)
Low Voltage Directive 2006/95/EC and EMC Directive 2004/108/EC
North America: cULus, File E244421;
FCC Compliant to CFR47, Part 15, Subpart B, Class A
Industry Canada (IC) Compliant to Canadian ICES-003, Class A limits
Australia: C-Tick Compliant (N1813)
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these
specifications, consult Johnson Controls Application Engineering at (414) 524-5535. Johnson Controls, Inc. shall not be liable for damages
resulting from misapplication or misuse of its products.
United States Federal Communication Commission (FCC) Compliance Statement
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when this equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case the user will be required to correct the interference at his/her own expense.
Canadian Compliance Statement
This Class (A) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe (A) respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.