Product Overview

The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2011 Johnson Controls, Inc.
www.johnsoncontrols.com
P-5215
Differential Pressure Transmitter
Description
The P-5215 Differential Pressure Transmitter
measures differential pressure between a low
and high input, and converts this
measurement into a proportional 3 to 15 psig
(21 to 105 kPa) output signal. Use the
Transmitter in control applications including
static, velocity, and differential pressure
control with the low input acting as a reference
less than, greater than, or equal to
atmospheric pressure.
Refer to P-5215 Differential Pressure
Transmitter Product Bulletin (LIT-7171220) for
important product information.
Features
• high volume relay for fast response
• factory calibrated for vertical mounting
• includes an integral mounting bracket
• fine tuning compensation for low reference
vs. atmospheric pressure
Repair Information
If the P-5215 Differential Pressure
Transmitter fails to operate within its
specifications, replace the unit. For a
replacement transmitter, contact the nearest
Johnson Controls® representative.
Selection Chart
Code Number P-5215 Differential Pressure Transmitter Range
P-5215-4 -0.05 to 0.05 in. WG (-12.45 to 12.45 Pa)
P-5215-5 0 to 0.1 in. WG (0 to 24.9 Pa)
P-5215-6 0 to 0.25 in. WG (0 to 62.25 Pa)
P-5215-7 0 to 0.5 in. WG (0 to 124.5 Pa)
P-5215-8 0 to 1.0 in. WG (0 to 249 Pa)
P-5215-9 0 to 2.0 in. WG (0 to 498 Pa)
P-5215-10 0 to 5.0 in. WG (0 to 1245 Pa)
Code No. LIT-1921430
Issued January 15, 2008
P-5215 Series
Differential Pressure Transmitter