Product Overview

2 P-3610 Product Bulletin
If the P-3610 is to be mounted
with the strap and bracket,
proceed as follows:
Note: When choosing a location
for installation, to assure a quick
response time, the length of
tubing between the restrictor,
controlled device, and the P-
3610 should be kept to a
minimum.
1. Bolt or weld the bracket to
the duct.
2. Attach the mounting strap to
the controller. Secure it by
tightening the screw
provided through the larger
of the two holes on the
strap.
3. Slip the strap into the offset
on the bracket.
4. Use the second screw
provided to attach the
bracket to the threaded hole
on the strap.
Repair information
If the P-3610 fails to operate
within its specifications, unit
replacement is required; field
repairs cannot be made.
Application and Drawing
Identification