Install Instructions
Part No. 24-11256-00007, Rev. B
6
NS8000 Series
Setup and adjustments for the xed segment display model
Adjusting the temperature setpoint
1. To view the current setpoint value, press the Up or Down icon once.
2. To increase or decrease the temperature setpoint by 0.5 degrees Fahrenheit or Celsius, press the Up or Down icon again.
3. To save the new settings, press the Menu icon once to return to the home screen or wait for ten seconds for the screen to
return to the home screen automatically.
4. Optional: Press and hold the Up or Down icon to continuously increase or decrease the temperature setpoint.
Adjusting the fan speed
1. To view the current fan speed, press the Fan icon once.
2. To adjust the fan speed, continue to press the Fan icon to cycle through the automatic, o, low, medium or
high fan speed settings.
3. To save the new settings, press the Menu icon once to return to the home screen or wait for ten seconds for the screen to
return to the home screen automatically.
Viewing the SA bus sensor address and the rmware version
1. Press the Menu icon once to view the SA bus sensor address. See Table 3 for setting the SA bus sensor address
2. Press the Menu icon a second time to view the rmware version.
3. Press the Menu icon a third time to return to the home screen or wait for ten seconds for the screen to return to the
home screen automatically.
Adjusting the temperature unit
To change the temperature units from Fahrenheit to Celsius or Celsius to Fahrenheit, complete the following steps:
1. On the home screen, press and hold the Up and Down icons for ve seconds until the middle display disappears and the
Celsius and Fahrenheit indicator icons blink.
2. To toggle between Fahrenheit and Celsius, press the Up or Down icon.
3. To save the new settings, press the Menu icon six times to return to the home screen or wait for ten seconds for the screen to
return to the home screen automatically.
Changing the home screen default value
Choose whether you want to display current temperature or the setpoint value in the middle of the home screen. To change which
value displays in the middle of the home screen, complete the following steps:
1. Press and hold the Up and Down icons for ve seconds until the Fahrenheit and Celsius indicator icons start to blink. All icons
are visible on the display.
2. Press the Menu icon once.
3. To select and switch between current temperature or setpoint value, press the Up or Down icon.
4. To save the new settings, press the Menu icon ve times to return to the home screen or wait for ten seconds for the screen to
return to the home screen automatically.
Selecting the setpoint display value
To change whether current temperature or setpoint temperature displays in the upper-right corner, complete the following steps:
1. Press and hold the Up and Down icons for ve seconds until the Fahrenheit and Celsius indicator icons start to blink.
2. Press the Menu icon twice.
3. To select and switch between current temperature or setpoint value, press the Up or Down icon.
4. To save the new settings, press the Menu icon four times to return to the home screen or wait for ten seconds for the screen to
return to the home screen automatically.
Selecting the maximum fan speed settings
The fan speed is set to high speed by default. To change the value of the maximum fan speed that displays on the home screen,
complete the following steps:
1. Press and hold the Up and Down icons for ve seconds until the Fahrenheit and Celsius indicator icons start to blink.
2. Press the Menu icon three times.
3. To increase or decrease the maximum fan speed, press the Up or Down icon.
4. To save the new settings, press the Menu icon three times to return to the home screen or wait for ten seconds for the screen
to return to the home screen automatically.
Notes:
• The touch display is sensitive to surrounding capacitance and may not respond to touch when you hold the sensor in
your hand. Mount the sensor vertically on the wall or place it on a at surface to use the icons and
change settings with ease.
• To activate the home screen when the backlight is o, touch the screen to turn the backlight back on for ten seconds.
• All icons are visible on the home screen during conguration.