Inc. Automobile Parts User Manual

M9220-GGx-3 Proportional Electric Spring Return Actuators Installation Instructions 7
Wiring
The M9220-GGx-3 Proportional Electric Spring Return
Actuator provides reliable, integrated damper control.
An AC 24 V at 50/60 Hz or DC 24 V input signal
between the black and red wires, and a
DC 0(2) to 10 V input control signal, causes the output
hub to rotate from -5 to 90° (unless an external
mechanical limit is reached).
Once the actuator reaches the commanded position, it
holds that position until power is removed. If power is
removed, the actuator spring returns to its
-5° position (unless an external mechanical limit is
reached). A stall condition while driving between
-5 to 90° causes the output hub to stop motion and
hold its position until power is removed. Rotation is
mechanically limited to the -5 and 90° positions by
integral end-stops. Optional end-stops are available to
limit the output hub travel. An anti-rotation bracket
prevents rotational movement of the actuator body.
See Figure 9 and Figure 10 for proper wiring of the
M9220-GGx-3 Proportional Electric Spring Return
Actuator.
!
CAUTION: Risk of Electric Shock.
Disconnect the power supply before
making electrical connections to avoid
electric shock.
!
CAUTION: Risk of Property Damage.
Do not apply power to the system before
checking all wiring connections. Short
circuited or improperly connected wires
may result in permanent damage to the
equipment.
IMPORTANT: Make all wiring connections in
accordance with local, national, and regional
regulations. Do not exceed the electrical ratings of
the M9220-GGx-3 Proportional Electric Spring
Return Actuator.
Figure 9: Auxiliary Switch Wiring Diagram for
GGC Models
COM
NC
NO
21
21
23
22
21
22
23
BLK/
RED
BLK/
BLU
BLK/
GRY
COM
NC
NO
24
25
26
WHT/
RED
WHT/
BLU
WHT/
GRY
25
24
24
26
S2
S1
FIG:auxswtch
Figure 10: Control Wiring Diagrams
w
i
r
i
n
g
12
34
~ (+)
Y
COM
U
BLK
RED
GRY
ORN
+
+
1
2
34
~ (+)
Y
COM
U
BLK
RED
GRY
ORN
0(4)...20mA
+
+
500 / 0.25 W Ω
DC 0(2)...10V Control
0(4)...20mA Control with
External Resistor
AC/DC
24 V
DC 0(2)...10 V
AC/DC
24 V
DC 0(2)...10 V
DC 0(2)...10 V