Brochure

30
Theperformancespecificationsare nominaland conformtoacceptable industrystandards. For applicationsatconditionsbeyondthese specifications, consultthe local Johnson Controlsoffice.
Johnson Controls,Inc.shall notbeliablefor damages resulting from misapplicationormisuse of itsproducts. ©9/07JohnsonControls, Inc.
www.johnsoncontrols.com
Electric Actuators
Accessories forM9220 Series Electric Actuators
Code Number Description
DMPR-KR003
1
Sleeve PinKit forJohnson Controlsround dampers witha5/16in. (8 mm) diameter shaft
DMPR-KC003
1
Square Head Blade Pin Extension withoutBracket for JohnsonControls CD-1300 direct-mount applications
DMPR-KC011 HexHeadBlade PinExtension without Bracket
DMPR-KC012 HexHead Blade PinExtension with Bracket
DMPR-KC210 Damper Jackshaft1”Diameter, 1Panel
DMPR-KC211 Damper Jackshaft1”Diameter, 2Panel
DMPR-KC212 Damper Jackshaft1”Diameter, 3Panel
DMPR-KC213 Damper Jackshaft½”Diameter,1Panel
DMPR-KC214 Damper Jackshaft½”Diameter,2Panel
M9000-519 Valve Linkage Kitfor mounting M9220actuators to 2-1/2in. to 4in. VG1xA5 Series flange bodyball valves.
M9000-153 CrankArm
M9000-170 Remote Mounting Kit,Horizontal.Kit includesMountingBracket, M9000-153 Crank Arm, Ball Joint, and MountingBolts.
M9000-171 RemoteMounting Kit,Vertical. Kit includes Mounting Bracket, M9000-153 CrankArm, Ball Joint, andMounting Bolts.
M9000-200 Commissioning To ol provides acontrol signal to drive on/off, floating, proportional, or resistive actuators.
M9000-53x Valve Linkage Kitfor mounting M9220actuators to 2-1/2to6in. VG2000 Series globe valves
M9000-604 Replacement Anti-rotationBracketKit (withScrews)for M9220-xxx-3 SeriesProportionalElectric Spring Return Actuators
M9220-600 1in. (25mm) Jackshaft Coupler Kit(with Locking Clip) for Mounting M9220-xxx-3 Series Proportional Electric Spring ReturnActuatorson
Dampers with 3/4to1-1/16 in. or 19 to 27 mm Round Shafts,or5/8 and3/4 in.or16, 18, and19mmSquareShafts
M9220-601 Replacement Coupler Kit (with Locking Clip) forMounting M9220-xxx-3 Series Proportional Electric Spring Return Actuators on Damperswith
1/2 to 3/4in. or 12 to 19 mm Round Shafts,or3/8 and 1/2in. or 10,12, and14mmSquare Shafts
M9220-602 Replacement Locking Clips forM9220-xxx-3 SeriesProportional Electric Spring ReturnActuators (Five per Bag)
M9220-603 Adjustable Stop Kit forM9220-xxx-3 SeriesProportional Electric Spring Return Actuators
M9220-604 Replacement Manual Override Cranks for M9220-xxx-3 Series Proportional Electric Spring Return Actuators(Five per Bag)
M9220-610 Replacement ShaftGripper,10mm SquareShaftwith LockingClip
M9220-612 Replacement ShaftGripper,12mmSquareShaftwith LockingClip
M9220-614 Replacement ShaftGripper,14mmSquareShaftwith LockingClip
1. Furnished withthe damperand maybe ordered separately.
Technical Specifications
M9220 Series Electric Spring Return Actuators (Part 1of2)
PowerRequirementsAGx, GGx, and HGx: AC 24 V(AC 19.2...30V) at 50/60Hz:Class 2, 15.6 VA Running, 7.7 VA Holding Position;
DC 24 V(DC 21.6...26.4V): Class 2, 7.5WRunning, 2.9WHolding Position
BAx: Nominal AC 120Vat60Hz:0.25ARunning,0.13AHoldingPosition
BDx: Nominal AC 230Vat50/60Hz:0.15ARunning, 0.09AHolding Position
BGx: AC 24 V(AC 19.2...30V) at 50/60Hz:Class 2, 24.6 VA Running, 7.7 VA Holding Position;
DC 24 V(DC 21.6...26.4V): Class 2, 17.6 WRunning, 2.8WHolding Position
Transformer Sizing
Requirements
AGx, GGx, and HGx: 20VA Minimum per Actuator
BGx: 25 VA Minimum per Actuator
Control Type AGx:
Bxx:
GGx:
HGx:
On-Off,and Floating
On-Off
DC 0(2)…10VDCorDC0(4)…20mA proportionalwith external 500 Ohm resistor
DC 0…10VDC or DC 0…20mA proportionalwithadjustable startand span
Input Signal AGx:
BAx:
BDx:
BGx:
GGx
HGx:
AC 24 Vat50/60Hzor DC 24 V
AC 120Vat60Hz
AC 230Vat50/60Hz
AC 24 Vat50/60Hz
DC 0(2)...10VorDC0(4)...20mA with 500 ohm resistor
DC 0...20V
Input Signal AdjustmentsAGx: SwitchSelectable Direct or Reverse Action
GGx: FactorySet at DC 0(2)...10V, CW Rotation withSignalIncrease;
Selectable DC 0(2)...10VorDC0(4)...20mA withField Furnished500 ohm, 0.25Wminimum resistor;
Switch Selectable Direct or Reverse Action with SignalIncrease
HGx: FactorySet DC 0...10V, CW RotationwithSignal Increase;
Selectable DC 0...10VorDC0...20mA withField Furnished500 ohm, 0.25Wminimum resistor;
Start Point ProgrammableDC0...10V;
Span Programmable DC 2...10V; Switch SelectableDirect or Reverse Action withSignal Increase
Input ImpedanceGGx:
HGx:
Voltage Input: 200,000 ohms;
CurrentInput:500 ohms withField Furnished 500 ohm Resistor
M9220 Series Electric Spring Return Actuators (Continued)