Installation Manual

10 | (215) 788-8485

(F) for Furnace or Boiler:

Set the fan type to Gas (most

common), Electric (for systems

without gas or oil), or Boiler (no

fan).

(HP) for Heat Pump:

Set the valve type to O or B - look

at the photo of your wiring to see

your valve type.

First you will need to set your system type:

Step 2.10: Your T-1000 is now ready to be congured for your heang

and cooling system. The T-1000 will guide you through the inial system

conguraon. Use the knob to change opons and press the knob to

conrm your selecon.

Press the knob when the thermostat is idle to view the menu.

Rotate the knob to select an opon and press again to conrm.

Press the knob when the thermostat is idle to

view the menu. Rotate the knob to select an

opon and press again to conrm.

System Mode

Installaon

Sengs

Fan Mode

Network

Connecon

Run Schedule

System

Preparing

For more informaon about

installaon sengs, please visit

LuxProducts.com/KONOmanual

H2O Degree

Network