Brochure

EP-8000 Series Electro-Pneumatic Transducers Product/Technical Bulletin
3
Dimensions
Installation
Parts Included
• EP-8000 Transducer
• No. 8 3/8 in. sheet metal screws (2)
Tools Required
• flat-blade screwdrivers, 3/32 in. and 1/4 in.
• 5/32 in. drill bit and drill
Mounting
Regardless of the mounting method chosen, the
EP-8000 must be mounted within 5° of vertical for
proper operation. (Refer to Figures 6 and 7.) In most
cases, the vertical position of the EP-8000 can be
obtained by correctly positioning the transducer's
mounting bracket and/or angle bracket. Do not mount
an EP-8000 directly to a damper actuator.
Figure 5: High-Volume Models, Output Flow
Capacity (scim and mL/s) versus Input Signal
(Volts DC and mA)
VDC
Figure 6: EP-8000 Low Volume Output Module
Dimensions (in./mm)
5°
5°
Figure 7: EP-8000 High Volume Output Model
Dimension (in./mm)