Product Overview

4 EP-8000 Series Electro-Pneumatic Transducers Product/Technical Bulletin
No. 8-32 Screw
Lon
g
Spacer
Cover
Flan
g
e
An
g
le
Bracket
An
g
le
Bracket Nut
Bolt
Cover
Flan
g
e
V-3000-1
Mountin
g
Detail
4R
,
5R
,
8R
,
V-400
,
and V-500
Mountin
g
Detail
Mountin
g
Bracket Nuts
(
2
)
Mountin
g
Bracket
or
EP-8000
Transducer
Mountin
g
Bracket
Screws
(
2
)
No. 6 x 10 mm
An
g
le Bracket Screw
Mountin
g
Bracket
W ashers
(
4
)
Figure 8: EP-8000-101 Mounting Kit for Installation of the EP-8000 to a 4R, 5R, 8R, V-400, V-500,
or V-3000-1 Valve Actuator with or without a V-9502 Positioner
Mountin
g
Bracket
Screws
(
2
)
Mountin
g
Bracket
Washers
(
4
)
Mountin
g
Bracket
V-3000-8001
Mountin
g
Detail
Mountin
g
Bracket
Nuts
(
2
)
Short
Spacer
V-3000-8001 with
V-9502 Positioner
Mountin
g
Detail
An
g
le
Bracket Nut
An
g
le
Bracket
No. 10-24 x 21mm
Screw
An
g
le Bracket Screw*
or
*Note: This is a No. 10-24 x 15 mm screw for the V-3000-8001,
but a No. 6 x 10 mm screw for the V-3000-8001 with the
V-9502 Positioner.
EP-8000
Transducer
Figure 9: EP-8000-101 Mounting Kit for Installation of the EP-8000 to a
V-3000-8001 Valve Actuator with or without a V-9502 Positioner
W
iring and Pneumatic Connections
!
CAUTION: Electric Shock Hazard.
Disconnect all power supplies
before wiring connections are
made to avoid electrical shock or
possible damage to the
equipment.
IMPORTANT: Make all wiring connections in
accordance with the National
Electrical Code and applicable
local regulations.
IMPORTANT: All EP-8000 Series transducers
are designed for use only in
conjunction with operating
controls. Where an operating
control failure would result in
personal injury and/or loss of
property, it is the responsibility of
the installer to add safety devices
or alarm systems that protect
against, or warn of, control
failure.