Brochure

ManualsBrandsJohnson Controls ManualsCurrent SensorsCurrent Sensing Relay, Solid Core with 24V Command Relay, Adjustable Setpoint 1.00 to 135A

The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.

www.johnsoncontrols.com

CSD Series Current Devices (Continued)

Selection Chart

Accessories (Order Separately)

Technical Specifications

Code Number Core Type Setpoint

Threshold

LED Display Low Setpoint

(Amperes)

Output Relay

CSD-SF0C0-1 Solid Fixed No 0.25 No

CSD-SA1E0-1 Solid Adjustable Yes 1.00 No

CSD-SA1E1-1 Solid Adjustable Yes 1.00 24 V SPST, N.O. 10 A at 260 VAC, 5 A at 30 VDC

CSD-SA1E2-1 Solid Adjustable Yes 1.00 12 V SPST, N.O. 10 A at 260 VAC, 5 A at 30 VDC

CSD-CF0A0-1 Clamp/Split Fixed No 0.15 No

CSD-CF0J0-1 Clamp/Split Fixed No 1.5 No

CSD-CA1G0-1 Clamp/Split Adjustable Yes 1.25 No

CSD-CF0J1-1 Clamp/Split Fixed No 1.5 24 V SPST, N.O. 10 A at 260 VAC, 5 A at 30 VDC

CSD-CA1G1-1 Clamp/Split Adjustable Yes 1.25 24 V SPST, N.O. 10 A at 260 VAC, 5 A at 30 VDC

Code Number Description

CR-01200-0

1. Refer to the Command Relay Installation Instructions (Part No.24-10345-50) for more information regarding the command relays.

12 VAC/VDC SPST, N.O. Relay

CR-02400-0

24 VAC/VDC SPST, N.O. Relay

CSD Series Current Devices - Solid Core Models

CSD-SF0C0-1 CSD-SA1E0-1 CSD-SA1E1-1 CDS-SA1E2-1

Amperage Range 0.25–200 A 1.00–135 A 1.00–135 A 1.00–135 A

Switch Setpoint Fixed Adjustable Adjustable Adjustable

Output Relay No No 24 V SPST, N.O. 10 A at

260 VAC, 5 A at 30 VDC

12 V SPST, N.O. 10 A at

260 VAC, 5 A at 30 VDC

Actuation Coil No No 20–30 VAC/VDC,

40–85 mA Maximum

10–14 VAC/VDC,

25–45 mA Maximum

Switch LED Indication No Yes Yes Yes

Relay LED Indication No No Yes Yes

Trip Setpoint Value 0.25 A 1.00 A 1.00–135 A

Current Switching Mode Under Current Sensing Over/Under Current Sensing Over/Under Current Sensing

Sensor Supply Voltage Induced from power conductor cable.

Wire Size 2.1–0.6 mm (12–22 AWG) Diameter

Status Output Switch normally open.

Switch Load Capacity 1 A at 30 VAC/42 VDC Maximum

Isolation Voltage 600 VAC rms

Temperature Range -15 to 60°C (5 to 140°F)

Frequency Range 50/60 Hz

Humidity Range 0–95% Noncondensing

Screw Torque 0.5 N·m (4 lb·in.)

Dimensions 65 x 47 x 25 mm (2-9/16 x 1-7/8 x 1 in.) 65 x 65 x 40 mm (2-9/16 x 2-9/16 x 1-19/32 in.)

Aperture (Sensing Hole) Size 18 mm Diameter (0.71 in. Diameter)

Compliance United States UL Listed, File E310692, CCN NRNT, Under UL 508, Industrial Control Equipment

Canada UL Listed, File E310692, CCN NRNT7, Under CAN/CSA C22.2 No. 14-M91

Industrial Control Equipment

Europe CE Mark – Johnson Controls, Inc., declares that this product is in compliance with the essential requirements and other

relevant provisions of the EMC Directive 2004/108/EC and the Low Voltage Directive 2006/95/EC.

Shipping Weight 0.16 kg (0.35 lb)