Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2015 Johnson Controls, Inc. www.johnsoncontrols.com
R-75
MS Series Temperature Stage Control Modules (Continued)
Multi-Stage Electronic Temperature Controls
MS4PM24T Panel Mount Control Wiring
ms4pm24t.eps
SC
S2
S1
D
V1 V2
Internal to Control
1234
C
Stage
3
Stage
2
Stage
1
Stage
4
Common
Power
Supply
Binary
Input
Binary/Sensor
Common
Auxiliary Temperature Sensor
Process
Sensor
Refer to Ratings T
able for more information
MS4DR24T Din Rail Mount Control Wiring
ms4dr24t.eps
Internal to Control
Auxiliary
T
emperature
Sensor
Stage 3
Stage 4
Stage
1
Stage
CDD
S2
SC
Power Supply
1
C1
C4
C2
3
C3
V1
V2
Process
Sensor
Binary Input
Sensor Common
Binary and Sensor Common
Terminal Not Used
See Ratings Table
for more information
Technical Specifications
Note: Relay outputs must not exceed 20 Amperes total connected load. Open collector transistors on the MS1 Alarm Circuits have a maximum
rating of 40 VDC 100 mA. Alarms require separate power source.
MS Series Temperature Stage Control Modules
Power Requirements 24 VAC, 50/60 Hz, Class 2 (20 to 30 VAC)
Power Consumption 5 VA at 24 VAC
Accuracy 1.8°F ( 1°C)
Ambient Conditions Operating +14 to +140°F (-10 to +60°C); 0 to 95% RH (noncondensing)
Storage -22 to +176°F (-30 to +80°C); 0 to 95% RH (noncondensing)
Agency Listings UL Recognized: File E194024, CCN XAPX2
Canadian UL Recognized: File E194024, CCN XAPX8
Dimensions
(H x W x D)
Panel Mount 1.38 x 2.95 x 2.68 in. (35 x 75 x 68 mm)
DIN Rail 4.65 x 2.76 x 2.07 in. (118 x 70 x 53 mm)
Electrical Ratings
120 VAC 240 VAC 24 VDC
Horsepower 1/4 1/2 ---
Full Load Amperes 5.8 4.9 ---
Locked Rotor Amperes 34.8 29.4 ---
Inductive (Non-Motor)
Amperes
88 8
Pilot Duty VA 275 450 ---