Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2015 Johnson Controls, Inc. www.johnsoncontrols.com
R-62
A28AKA Industrial Thermostat
A28 Two-Stage Industrial Thermostat (Watertight and Dusttight)
Description
The A28KA is a wide range temperature
control with gasketed enclosure and two
single-pole, double-throw (SPDT) switches.
Refer to the A19A, A19K, A28K Series
Industrial Controls Remote Bulb Product
Bulletin (LIT-125105) for important product
application information
Features
rugged steel enclosure
liquid-filled sensing element that provides
uniform control
Applications
This control is for refrigeration, air
conditioning, and heating applications. This
model incorporates a gasketed enclosure that
can be used in a wide range of industrial and
general purpose applications.
Repair Information
If the A28 Two-Stage Industrial Thermostat fails
to operate within its specifications, replace the
unit.
For a replacement thermostat, contact the
nearest Johnson
Controls®
representative.
Technical Specifications
Note: When used as a two-circuit control,
the total connected load must not exceed
2,000 VA.
Electrical Ratings
Motor Ratings AC 120 208 240
AC Full Load A 16.0 9.2 8.0
AC Locked Rotor A 96.0 55.2 48.0
Non-Inductive or
Resistance Load A
(Not Lamp Loads)
16.0 9.2 8.0
Pilot Duty 125 VA, 24 to 277 VAC
Selection Chart
Product Code
Number
Switch
Action
Range
°F (°C)
Differential
F° (C°)
Bulb and
Capillary
Bulb Well No.
(Order Separately)
Range
Adjuster
A28KA-1C Two-SPDT 0 to 150
(-15 to 65)
5 (2.8) each stage
3 (1.7) fixed between stages
0.290 x 2-1/2 in.
10 ft capillary
WEL16A-600R Knob
Multi-Stage Electromechanical Temperature Controls
Code No. LIT-1927120