Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2015 Johnson Controls, Inc. www.johnsoncontrols.com
R-57
MR Series Defrost Control Modules (Continued)
Single-Stage Electronic Temperature Controls
Technical Specifications
MR Series Defrost Control Modules
Power Requirements 24 VAC, 50/60 Hz Class 2 (20 to 30 VAC)
Power Consumption 3.7 VA at 24 VAC
Accuracy ± 1.8F° (± 1°C)
Ambient
Conditions
Operating +14 to +140°F (-10 to +60°C); 0 to 95% RH (noncondensing)
Storage -22 to +176°F (-30 to +80°C); 0 to 95% RH (noncondensing)
Dimensions
(H x W x D)
Panel Mount 1.38 x 2.95 x 2.68 in. (35 x 75 x 68 mm)
DIN Rail: 4.65 x 2.76 x 2.07 in. (118 x 70 x 53 mm)
Agency Listings UL Recognized: File E194024, CCN XAPX2
Canadian UL Recognized: File E194024, CCN XAPX8
Note: Relay outputs must not exceed 20 Amperes total
connected load. Open collector transistors on MR1
alarms have a maximum rating of 40 VDC 100 mA.
Alarms require external power source.
Electrical Ratings of Contacts
Rating Category 120 VAC 240 VAC 24 VDC
Horsepower 1/4 1/2 ---
Full Load Amperes 5.8 4.9 ---
Locked Rotor Amperes 34.8 29.4 ---
Inductive (Non-Motor)
Amperes
888
Pilot Duty VA 275 450 ---
Internal to Control
V1 V2
Power
Supply
Compressor
Evaporator
Fan
Defrost
SC S2S1 D CD
Process Temperature Sensor
Binary Input
Alarm
Evaporator
Temperature
Sensor
Fr Fn
Df
A1 A2
C1 C2
C3
Sensor
Common
Binary Common
Terminal Not Used
Refer to Rating Table for more information
MR4 DIN Rail Control
mr4panel.eps
CSCS1 S2D
V1 V2
Internal to Control
Power
Supply
Evaporator Temperature
Sensor
Binary
Input
Process Temperature Sensor
Sensor
Common
Common
Compressor
Alarm
Defrost
Evaporator
Fan
Fr
A1
Df
Fn
Refer to Rating Table for more information
MR4 Panel Mount Control
mr4dinrl.eps