Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2015 Johnson Controls, Inc. www.johnsoncontrols.com
R–49
A421 Series Electronic Temperature Controls with Integral Power Cord
(Continued)
Single-Stage Electronic Temperature Controls
Technical Specifications
A421 Series Electronic Temperature Controls
Power Consumption 1.8 VA maximum
Supply Power 110/120 VAC, 50/60 Hz
Ambient Conditions Operating: Type 1 Models: -40 to 150°F (-40 to 66°C), 0 to 95% RH noncondensing
Type 4X Models: -40 to 140°F (-40 to 60°C), 0 to 95% RH noncondensing
Shipping and Storage: All Models: -40 to 185°F (-40 to 85°C), 0 to 95% RH noncondensing
Temperature Control Range -40 to 212°F (-40 to 100°C)
Input Signal 1,035 ohm at 77F (25C) for A99 PTC temperature sensors
Sensor Offset Range ±5ºF or ±3ºC
Output Relay Contacts Electrical
Ratings
120 VAC Model with Integral Power Cord:
Applied Voltage: 120 VAC
Full Load Amperes N.O.: 12 A
Locked Rotor Amperes N.O.: 72 A
Resistive Amperes N.O.: 12 A
Pilot Duty: 125 VA (N.O. contacts) at 24 to 120 VAC
Enclosure Material NEMA 1/IP20 high-impact thermoplastic or
NEMA 4X/IP66 watertight, corrosion-resistant, high-impact thermoplastic
Compliance North America: cULus Listed; UL 60730, File E27734, Vol. 1; FCC Compliant to CFR47, Part 15, Subpart B, Class B
Industry Canada (IC) Compliant to Canadian ICES-003, Class B limits