Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2015 Johnson Controls, Inc. www.johnsoncontrols.com
R-38
A19ZBC-2 Defrost Duration and
Fan Delay Control
A19 Defrost Duration and Fan Delay Control
Description
The A19 Defrost Duration and Fan Delay
Control is a remote bulb control with
adjustable defrost termination temperature
and preset fan delay temperature.
Refer to the A19ZBC Type Temperature
Control Product Bulletin (LIT-121071) for
important product application information.
Features
sensing element unaffected by barometer
pressure and cross ambient temperature
problems
limited adjustment range
Applications
Use for defrost termination control for
refrigerated display cases.
Selection Chart
Product Code
Number
Switch
Action
Defrost Termination
°F (°C)
Bulb and
Capillary
Range
Adjuster
A19ZBC-2C Single-Pole,
Double-Throw
(SPDT)
45 to 85 (7 to 29) 19/64 in. x 3-1/8 in.; 6 ft. capillary Knob
Repair Information
If the A19 Defrost Duration and Fan Delay
Control fails to operate within its specifications,
replace the unit. For a replacement control,
contact the nearest Johnson
Controls®
representative.
Technical Specifications
maximum bulb temperature: 140°F (60°C)
fan delay temperature: factory set at
25°F (-4°C)
Electrical Ratings
Motor Ratings VAC 120 208 240
AC Full Load A 16.0 9.2 8.0
AC Locked Rotor A 96.0 55.2 48.0
Non-Inductive or
Resistance Load A
(Not Lamp Loads)
16.0 9.2 8.0
Pilot Duty 125 VA, 24 to 277 VAC
Single-Stage Electromechanical Temperature Controls
Code No. LIT-1927095