Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2015 Johnson Controls, Inc. www.johnsoncontrols.com
R-30
A19D Series Surface Mounted Temperature Controls
Description
The A19D Series Surface Mounted
Temperature Controls are reliable, durable
On/Off temperature controls with line-voltage
single-pole, double-throw (SPDT) switches.
The A19D Series Controls are designed
primarily for fluid piping applications and
include two adjustable mounting straps for
mounting the control directly to a pipe.
Refer to the A19D Series Surface Mounted
Temperature Controls Product Bulletin
(LIT-125070) for important product application
information.
Features
SPDT switch action provides either high or
low temperature detection.
sealed, dust-protected switch provides
reliable and durable On/Off control for
commercial and industrial applications.
color-coded electrical terminals simplify
wiring the controls.
sensing element insulated from the control
case minimizes the effects of ambient
temperature on the control setpoint.
convertible range adjuster kit provides
knob, screwdriver, or concealed
adjustment options.
multi-position mounting capability allows
you to mount the control in any position on
horizontal, vertical, or angled pipes.
NEMA 1 enclosure provides protection
against contact with the control’s electrical
components and protects the switch and
electrical terminals from incidental contact.
Applications
Typical A19D control applications include high
temperature detection on boiler applications
and low temperature detection on unit heaters
coil applications.
Selection Chart
Product Code
Number
Description
A19DAC-1C 100 to 240°F Temperature Range and Scale, 10 F° (± 2.8 F°) Differential, Visible Range Scale
A19DAC-9C 40 to 120°C Temperature Range and Scale, 6 C° (± 1.0 C°) Differential, Visible Range Scale
A19DAC-10C 40 to 120°C Temperature Range and Scale, 6 C° (± 1.0 C°) Differential, Concealed Range Scale
A19DAC-12C 100 to 240°F Temperature Range and Scale, 10 F° (± 2.8 F°) Differential, Concealed Range Scale
A19DAF-2C 200 to 240°F Temperature Range and Scale, 3-1/2 F° (± 2.0 F°) Differential, Concealed Range Scale
Technical Specifications
A19D Series Surface Mount Temperature Controls
Product Code Number A19DAC: SPDT switch, standard differential
A19DAF: SPDT switch, narrow differential
Adjustable Temperature Range A19DAC: 100 to 240°F or 40 to 120°C
A19DAF: 200 to 240°F (95 to 120°C)
Fixed Temperature Differential A19DAC: 10 F° or 6.0 C°
A19DAF: 3-1/2 F° (1.9 C°)
Maximum Ambient Operating
Temperature
Controller Housing: 140°F (60°C)
Sensor Element: 250°F (121°C)
Switch Contact Action SPDT, Snap Acting, Enclosed Dust Protected Pennswitch
Red to Yellow Terminal Contacts Close on Temperature Increase
Red to Blue Terminal Contacts Open on Temperature Increase
Terminal Screws No. 8-32 x 1/4 in. Binder Head with Cup Washers
Electrical Ratings A19DAC: Standard Differential
A19DAF: Narrow Differential
Motor Rating VAC 120 240 120 240
Full Load Amperes 10.0 6.0 6.0 3.4
Locked Rotor Amperes 60.0 36.0 36.0 20.4
Non-Inductive Amperes 10.0 6.0 6.0 3.4
Pilot Duty 125 VA, 24 to 277 VAC 125 VA, 24 to 277 VAC
Enclosure NEMA Type 1 General Purpose; Cold Rolled Steel, Gray Baked Enamel
Mounting Clamp-On (Straps Included)
Shipping Weight 1-1/5 lb (.54 kg)
Compliance UL Guide No. XAPX, File E6688
CSA Class No. 4813 02, File LR948
C-Tick
Single-Stage Electromechanical Temperature Controls
A19D Series Temperature Control
Repair Information
If the A19D Series Surface Mounted Temperature
Control fails to operate within its specifications,
replace the unit. For a replacement control,
contact the nearest Johnson
Controls®
representative.
Y
B
R
FIG:6SPDT_chngHI
Switch Action 6
Y-R is op en
B-R is closed
Y-R cl oses
B-R opens
At Setpoint
On Increase
SPDT Switch
A19D Series Control Switch Action
Code No. LIT-1927065