Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2015 Johnson Controls, Inc. www.johnsoncontrols.com
R-29
A19 Series Automatic Changeover with Strap-On Mounting
Description
The A19 Series Changeover is a control for
use with combination heating and cooling
thermostats.
Refer to the A19CAC Type Automatic
Changeover Control Product Bulletin
(LIT-125065) for important product application
information.
A19 Series
Action on Increase
of Temperature
Y
B
R
A19 Series
Terminal Arrangement for SPDT
a19.eps
Features
This control automatically selects the correct
thermostat function.
Applications
Recommended for convectors, fan coils, and
blast coil units, and similar devices. The
A19CAC-2 Control can be mounted directly on
either a vertical or a horizontal pipe, using the
can mounting strap supplied with control. The
A19CAC-1 Control has a remote bulb for
greater mounting convenience.
Selection Charts
A19 Series Automatic Changeover with Strap-on Mounting
Product Code Number Switch Action Range °F (°C) Differential F°(C°) Mounting
A19CAC-1C Single-Pole,
Double-Throw
(SPDT)
60 to 90 (16 to 32) 10 (5.6) 42 in. Capillary
A19CAC-2C SPDT 60 to 90 (16 to 32) 10 (5.6) Direct
Replacement Parts
Product Code Number Description
CVR28A-617R Concealed adjustment cover
Technical Specifications
maximum case ambient temperature:
131°F (55°C)
maximum bulb temperature: 250°F (121°C)
Electrical Ratings
Motor Ratings VAC 120 240
AC Full Load A 10.0 6.0
AC Locked Rotor A 60.0 36.0
AC Non-Inductive A 10.0 6.0
Pilot Duty 125 VA,
24 to 240 VAC
A19CAC-1 Control
(Remote Bulb Model)
Single-Stage Electromechanical Temperature Controls
Code No. LIT-1927060