Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2015 Johnson Controls, Inc. www.johnsoncontrols.com
R-221
System 450™ Compatible Sensors, Transducers, and Accessories
(Continued)
System 450 Control Series
System 450 Compatible TE-68NT-0N00S 1,000 Ohm Nickel Temperature Sensor Ordering Information
Product Code Number Product Description
TE-68NT-0N00S TE6800 Series 1,000 ohm nickel temperature sensor for wall-mount applications. For more information, including sensor
description, technical specifications, and mounting accessories, refer to the TE-6800 Series Temperature Sensors Product Bulletin
(LIT-12011542). (System 450 Sensor Types HIC and HIF)
System 450 Compatible HE67S3 Type Humidity Sensors with Integral A99B Temperature Sensor Ordering Information
1
Product Code Number Product Description
HE-67S3-0N0BT Wall Mount Humidity Sensor with A99B Type Temperature Sensor: 10 to 90% RH;
0 to 60C (32 to 140F)
HE-67S3-0N00P Duct Mount Humidity Sensor with A99B Type Temperature Sensor: 10 to 90% RH;
0 to 60C (32 to 140F)
1. The HE-67S3 sensors require 24 VAC input and must use the 0 to 5 VDC output. Refer to the TrueRH Series HE-67xx Humidity Element with Temperature
Sensors Product Bulletin (LIT-216245) on the Johnson Controls Product Literature website for more information, including technical specifications and mounting
accessories.
System 450 Compatible HE6800 Series Humidity Transmitters with Temperature Sensor Ordering Information
1
Product Code Number Product Description
HE-68N2-0N00WS Wall Mount Humidity Transmitter with Nickel Temperature Sensor:
10 to 90 ±2% RH; 0 to 55C (32 to 131F)
HE-68N3-0N00WS Wall Mount Humidity Transmitter with Nickel Temperature Sensor:
10 to 90 ±3% RH; 0 to 55C (32 to 131F)
1. The HE-6800 transmitters require 24 VAC input and must use the 0 to 5 VDC output. Refer to the HE-6800 Series Humidity Transmitters with Temperature
Sensor Product Bulletin (LIT-12011625) on the Johnson Controls Product Literature website for more information, including technical specifications and
mounting accessories.
System 450 Compatible Low Pressure Differential Transducer Ordering Information
1
2
Product Code Number Product Description
DPT2650-R25B-AB Low Pressure Differential Transducer: -0.25 to 0.25 in. W.C. (System 450 Sensor Type: P 0.25)
3
DPT2650-0R5D-AB Low Pressure Differential Transducer: 0 to 0.5 in. W.C. (System 450 Sensor Type: P 0.5)
DPT2650-2R5D-AB Low Pressure Differential Transducer: 0 to 2.5 in. W.C. (System 450 Sensor Type: P 2.5)
DPT2650-005D-AB Low Pressure Differential Transducer: 0 to 5.0 in. W.C. (System 450 Sensor Type: P 5)
DPT2650-10D-AB Low Pressure Differential Transducer: 0 to 10 in. W.C. (System 450 Sensor Type: P 10)
1. Refer to the Setra Systems Model DPT265 Very Low Differential Pressure Transducer Catalog Page on the Johnson Controls Product Literature website for
more information.
2. The DPT265 sensors require 24 VAC input and must use the 0 to 5 VDC output. Refer to the Setra Systems Model DPT265 Very Low Differential Pressure
Transducer Catalog Page on the Johnson Controls Product Literature website for more information.
3. Used only with Communications Control Modules.
System 450 Compatible P499 Series Transducers with 1/4 in. SAE 45 Flare Internal Thread with Depressor (Style 47) Ordering
Information
1
Product Code Number Product Description
P499RCP-401C -1 to 8 bar; order WHA-PKD3 type wire harness separately
P499RCP-402C -1 to 15 bar; order WH A-PKD3 type wire harness separately
P499RCP-404C 0 to 30 bar; order WHA-PKD3 type wire harness separately
P499RCP-405C 0 to 50 bar; order WHA-PKD3 type wire harness separately
P499RCPS100C -10 to 100 psis (sealed for wet and freeze/thaw applications); order WHA-PKD3 type wire harness separately
P499RCPS100K -10 to 100 psis (sealed for wet and freeze/thaw applications); WHA-PKD3-200C wire harness included
P499RCPS102C 0 to 200 psis (sealed for wet and freeze/thaw applications); order WHA-PKD3 type wire harness separately
P499RCPS102K 0 to 200 psis (sealed for wet and freeze/thaw applications); WHA-PKD3-200C wire harness included
P499RCP-101C 0 to 100 psi; order WHA-PKD3 type wire harness separately
P499RCP-101K 0 to 100 psi; WHA-PKD3-200C wire harness included
P499RCP-105C 0 to 500 psi; order WHA-PKD3 type wire harness separately
P499RCP-105K 0 to 500 psi; WHA-PKD3-200C wire harness included
P499RCP-107C 0 to 750 psi; order WHA-PKD3 type wire harness separately
P499RCP-107K 0 to 750 psi; WHA-PKD3-200C wire harness included
1. The P499 sensors must be powered with the +5 VDC and C terminals and the output is 0.5 to 4.5 VDC. Refer to the P499 Series Electronic Pressure
Transducers Product/Technical Bulletin (LIT-12011190) on the Johnson Controls Product Literature website for more information.