Brochure
Table Of Contents
- Refrigeration Products Catalog, PUBL-5510
- Product Catagories
- Table of Contents
- Code Number Index
- Single-Stage Electromechanical Temperature Controls
- A11 Series Low Temperature Cutout Controls
- A19 Series Remote Bulb Control
- A19 Series High Range Temperature Control
- A19 Series Thermostat for Crop Drying
- A19 Series Hot Water Temperature Control (Well Immersion)
- A19 Temperature Control Less Enclosure (SPDT, Close Differential
- A19 Series Thermostat for Hazardous Locations
- A19 Series Coiled Bulb Space Thermostat
- A19 Thermostat for Portable Heaters (Chain Mount and Drop Cord Electrical Connection)
- A19 Thermostat for Portable Cooling Applications (Chain Mount and Drop Cord Electrical Connection)
- A19 Series Automatic Changeover with Strap-On Mounting
- A19D Series Surface Mounted Temperature Control
- A19 Flange Mounted Duct Thermostat
- A19 Series Fan or Cutout Control (Liquid Expansion Bulb)
- A19ANC-1 Temperature Control with Rainproof Enclosure
- A19 Agricultural/Industrial Thermostat with NEMA 4X Enclosure
- A19 Industrial Thermostat (Watertight and Dusttight)
- A19 Temperature Control with NEMA 4X Enclosure (Remote Bulb)
- A19 Water Chiller Control with Locked Cut-Out/Adjustable Cut-In
- A19 Defrost Duration and Fan Delay Control
- A25 Series Warm Air Limit Control with Manual Reset
- A70 Series Four-Wire, Two-Circuit Temperature Control
- A72 Series Two-Pole Heavy Duty Temperature Controls (Adjustable Differential)
- A72 Series Cooling Tower or Evaporative Condenser Controls (Single-Stage Temperature Control with Outdoor Enclosure)
- A72AA Coiled Bulb Space Thermostat (Cooling)
- Single-Stage Electronic Temperature Controls
- A421 Series Electronic Temperature Controls
- A421 Series Electronic Temperature Controls with Integral Power Cord
- A421 Series Electronic Temperature Controls with Off-Cycle Defrost
- A421 Series Electronic Temperature Controls with Integral Cycle Timer
- MR Series Defrost Control Modules
- MR4PMUHV Electronic Temperature/Defrost Control with Relay Pack
- Multi-Stage Electromechanical Temperature Controls
- A28 Series Two-Stage Temperature Control
- A28 Series Two-Stage Flange Mounted Duct Thermostat
- A28 Two-Stage Industrial Thermostat (Watertight and Dusttight)
- A28 Two-Stage Temperature Control with Weatherproof Enclosure
- A28 Two-Stage Agricultural Thermostat with NEMA 4X Enclosure
- A36 Series Four-Stage Remote Bulb Thermostats
- S26 Series Switching Subbase
- T22/T25/T26 Series Line Voltage Wall Thermostat (Heating, Cooling, or Heating and Cooling)
- Typical Wiring Diagrams and Electrical Ratings for Line Voltage Thermostats
- T23 Series Fan Coil Thermostat (with Fan and System Selectors)
- T28 Series Fan Coil Thermostat (with or without Fan Selector Switches)
- T46 Series Fan Coil Thermostat
- Multi-Stage Electronic Temperature Controls
- Temperature Control Sensors and Accessories
- Standard Electromechanical Pressure Controls
- P10 Series Low Pressure Control
- P20 Series Air Conditioning/Pressure Cutout Control
- P29 Series Low Pressure Control with Time Delay
- P47 Series Steam Pressure Limit Control
- P67 Series Low Pressure Control
- P70, P72 Approximate Low Pressure Settings for Typical Applications
- P70, P72, and P170 Series Controls for Low Pressure Applications
- P70, P72, and P170 Series Controls for High Pressure Applications
- P70, P72, and P170 Series Controls for Dual Pressure Applications
- Single-Stage Electronic Pressure Controls
- Electromechanical Lube Oil and Differential Pressure Controls
- Electronic Lube Oil and Differential Pressure Controls
- Pressure Sensors and Accessories
- Refrigerant Sensors/Monitors
- Liquid Level and Flow Controls
- Motor Speed Controls
- Valves and Valve Accessories
- V43/V243 Series Pressure-Actuated Water-Regulating Valves
- V46 Series Pressure Actuated Water Regulating Valve
- V46N Series Reverse Acting Valve
- V46 Series Valve Sizing Information-90% Open Method
- V46 Series Valve Dimensions
- V47 Series Temperature Actuated Modulating Valve
- V47N Series Reverse Acting Valve
- V48 Series Three-Way Water Regulating Valve
- V146 Series Two-Way Pressure-Actuated Water-Regulating Valves
- V148 Series Three-Way Pressure-Actuated Water-Regulating Valves
- V246 Series Two-Way Pressure-Actuated Water-Regulating Valves for High-Pressure Refrigerants
- V248 Series Three-Way Pressure-Actuated Water-Regulating Valves for High-Pressure Refrigerants
- STT Water Valve Renewal Kit for V46, V47, and V48 Series Valves
- Companion Flanges and Gaskets for V43, V46, and V47 Series Valves
- Relays and Transformers
- System 450 Control Series
- System 450™ Series Modular Controls
- System 450™ Series Control Module with Network Communications
- System 450™ Reset Control Modules with Real-Time Clock and Relay Output
- System 450™ Control Modules with Analog Output
- System 450™ Control Modules with Relay Output
- System 450™ Control Module with Hybrid Analog Output
- System 450™ Expansion Modules with Analog Output
- System 450™ Expansion Modules with Relay Output
- System 450™ Power Module
- System 450™ Compatible Sensors, Transducers, and Accessories
- Cross-Reference
- HVACR Product Offerings
- Sales Contact Information
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2015 Johnson Controls, Inc. www.johnsoncontrols.com
R-125
RLD-H10PRO Refrigerant Leak Detector
Code No. LIT-1900954
Description
The RLD-H10PRO is a professional-grade
leak detector for use by refrigeration and air
conditioning technicians. This detector
senses all CFC, HCFC, and HFC refrigerants
and blends, such as R12, R22, R134a,
R404a, R410a, R502, and R507 among
others. The RLD-H10PRO is self-powered
with a rechargeable battery and provides both
manual and automatic compensation for
background levels of refrigerant. A full line of
accessories and maintenance kits are also
available, including replacement sensors,
tuneup kits, probe extensions, battery
chargers, and leak vial bottles.
Refer to the RLD-H10PRO Refrigerant Leak
Detector Product Bulletin (LIT-12012073) for
important product application information.
Features
• positive ion emission heated diode sensor
provides the most sensitivity available
today, while still detecting all halogenated
refrigerant gases
• rechargeable battery with low and full
charge LEDs enhances portability—no
external power required
• high quality air pump supplies constant
airflow to the sensor so it responds quickly
to leaks; also helps the sensor recover
quickly after exposure to a refrigerant so
the leak can be verified
• switchable adjustment for manual or
automatic balance allows users to choose
their preferred method of compensation for
background refrigerant levels
• visual and audible signal facilitates
sensing in noisy equipment rooms with
360° visibility and a piercing tone.
Frequency of noise and light indicates the
magnitude of the leak.
• headset jack allows users to hear the leak
detector response in noisy environments
• external calibration source and calibration
indicators indicate when the sensor is
working properly and serves as a
reference point to judge leak size
Selection Chart
Accessories
Product Code
Number
Description
RLD-H10PRO-1 Refrigerant leak detector and
charger
Product Code
Number
Description
RLD-H10-100 14 inch flexible probe extension
RLD-H10-101 120 VAC power supply adaptor
RLD-H10-102 Cigarette lighter adaptor
RLD-H10-103 Replacement battery charger
RLD-H10-105 Belt pack battery
RLD-H10-600R Tuneup kit: includes sensor,
100 filters, three airflow balls,
three rubber probe tips, and
leak vial
RLD-H10-601R Replacement sensor
RLD-H10-602R Maintenance kit: includes
100 filters, three airflow balls,
three rubber probe tips, and
leak vial
RLD-H10-603R Replacement leak vial
RLD-H10-604R Replacement for RLD-H10PRO
internal battery
RLD-H10-606R Clear plastic probe tip
RLD-H10-607R Probe replacement assembly
Technical Specifications
RLD-H10PRO Refrigerant Leak Detector
Power Requirements 12 VDC internal battery, or 100 to 240 VAC input/18 V output wall adaptor
(included) (RLD-H10-101).
Sensing Element Type Positive ion emission heated diode
Approximate
Sensitivity
1
1. Sensitivity for R12, R22, R134a, R410a, R404a, and R507 when unit is set to small leak setting, manual
mode.
Stationary 0.006 oz./yr
Moving (Per SAE
J2791)
0.1 oz./yr
Automatic Background
Adjustment
Mode selection for automatic or manual background zeroing
Manual background zeroing provides the best sensitivity.
Leak Alarm Audible alarm (through internal beeper or stereo headphone jack), visible red
LED
Response Time Approximately 1 second
Warmup Time Approximately 2 minutes
Probe Length Approximately 4-1/2 ft (1.4 m)
Ambient Operating
Conditions
32 to 104°F (0 to 40°C); 5-90% RH, noncondensing
Ambient Storage
Conditions
14 to 140°F (-10 to 60°C); 5-90% RH, noncondensing
Case Rugged high-density polyethylene
Dimensions (H x W x D) 5-2/5 x 10-1/2 x 8-3/10 in. (137 x 267 x 211 mm)
Compliance
Europe: CE Mark Johnson Controls, Inc. declares that this product is in
compliance with the essential requirements and other relevant provisions of the
EMC Directive 2004/108/EC.
Shipping Weight 5.1 lb (2.3 kg)
RLD-H10PRO Refrigerant Leak
Detector
Refrigerant Sensors/Monitors
Repair Information
If the RLD-H10PRO Refrigerant Leak Detector
fails to operate within its specifications,
contact
Johnson Controls® application engineering at
(414) 524-5535.